Bedienungsanleitung NAD T 748 (Seite 12 von 40) (Englisch)

493496

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

TUNER CONTROL USE WITH T 748 TUNER SECTION AND OTHER COMPATIBLE NAD

RECEIVER, AM/FM/DAB TUNER MODELS

Set the DEVICE SELECTOR to “TUN” in order to gain access to these buttons. Refer to the corresponding

labels printed in the remote control faceplate and their respective assigned buttons to make use

of these functions. Some of the control buttons below are applicable only to specic NAD Receiver

or Tuner models; check the owner’s manual of your NAD Receiver or Tuner for control button

compatibility. You can also load the applicable NAD code library to this device so that it can be made

compatible with your other NAD equipment. Refer to the section below about “LIBRARY” on how to

load a NAD code library.

TUNE [ 7/8 ] or [ A/S ]: Tune forward or backwards.

INFO: Repeatedly pressing this button will show information as supplied by the current radio

station. The applicable display contents include related DAB display information and RDS broadcast

data.

PRESET [ 9/0 ] or [ D/F ]: Step up or down Preset numbers.

[ A/S ]: In combination with [TUNER MODE] or other compatible buttons, select through

applicable DAB menu options.

ENTER: Select Preset or Tune mode at AM/FM band. Display signal strength at DAB mode.

AM/FM/DB: Select DAB, FM or AM band, as applicable.

TUNER MODE: In FM mode, toggle between “FM Mute On” and “FM Mute O”. At DAB mode,

use the [TUNER MODE] button in combination with the front panel [A/S] and [ENTER] buttons to

activate DAB menu options.

BLEND: Engage or disengage BLEND feature. This is not applicable to T 748.

MEMORY: Save current station to a Preset number.

DELETE: Delete selected Preset number.

NOTE

For iPod player-specic control buttons, please refer to “CONTROL FEATURES” under “OPERATION -

LISTENING TO YOUR iPod PLAYER”.

LIBRARY

The AVR 4 can store a dierent library of default NAD codes for each of its DEVICE SELECTOR “pages.”

If the original default library does not control your NAD CD player, DVD player, or other component,

follow the procedure below to change the library code. Refer as well to the table below for a list of

applicable NAD Library Codes with their corresponding NAD models.

LOAD ANOTHER LIBRARY CODE

Example: Load NAD DVD Player T 517 library code to AVR 4’s “BD” device.

1 Press and hold [BD] in the DEVICE SELECTOR section of AVR 4.

2 While holding down the device button [BD], press “2” and “2” using AVR 4’s numeric buttons. “22” is

the corresponding library code for T 517.

3 Press [ENTER] while still holding down the device button [BD]. The BD device selector will ash

once to indicate that the library input is successful. Both the device selector button [BD] and

[ENTER] can now be released.

IDENTIFICATION OF CONTROLS

AVR 4 REMOTE CONTROL

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 748 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 748

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info