Bedienungsanleitung NAD T 748 (Seite 35 von 40) (Englisch)

493496

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

The T 748 is equipped with a data port in the rear panel where an optional

“NAD IPD Dock for iPod” (NAD IPD) can be plugged in. With the NAD IPD

linking the T 748 with your own iPod player, you can enjoy listening to your

favorite tracks and playlists as well as view applicable still image and video

playback.

You can control your iPod player using the assigned buttons in the T 748

front panel. And with the corresponding AVR 4 remote control function

keys, you can select the materials stored in your iPod for playback as well as

access many of its functions even from across the room. The optional NAD

IPD also charges your iPod player while it is connected to the T 748.

NOTES

• “NAD IPD Dock for iPod” (NAD IPD) currently has two versions - the NAD

IPD 1 and NAD IPD 2. These two NAD IPD models and later variants are

compatible with the T 748.

• NAD IPD and iPod player are not supplied with your T 748.

• iPod player functions, features and playback capabilities accessible

through T 748 may vary depending on your iPod player model.

• When using the AVR 4 to control the iPod functions, make sure that the

Device Selector is set to “MP.”

CONNECTING THE OPTIONAL NAD IPD AND

iPod PLAYER TO THE T 748

Make sure that all the devices are unplugged before making the

connections.

1 Connect the NAD IPD’s DATA PORT to the corresponding “MP DOCK”

data port of the T 748.

2 Connect also the NAD IPD’s S-Video out and audio out to the T 748

AUDIO 2/S-VIDEO input (the default iPod source allocation in the T 748).

3 Dock your iPod player into the NAD IPD.

NAVIGATING THE IPOD PLAYER’S FUNCTIONS AND FEATURES

After linking together your iPod player, NAD IPD and the T 748, you can now

plug them IN to their applicable power sources.

1 With your T 748, iPod player and NAD IPD all at power ON state, select

SOURCE 5 (iPod) of your T 748. Your iPod player will show in its display

the NAD logo and below it “OK to disconnect.” On the other hand, the

T 748 VFD will show in the upper line “iPod Menu” and the lower line

“Playlists”. The lower line will vary depending on the current menu

selected. At the same time, the T 748 OSD will display the whole iPod

Menu selections like Playlists, Artist, Albums, Genres, Songs, Composers,

Audiobooks and Podcasts.

2 Navigate through the iPod menu selections using a combination of the

[ A/S/D/F ] buttons.

NOTES

• To exit from the iPod Menu at Source 5 (iPod), press [ A ] bringing you to

“Menu Select” OSD. Follow the instructions as prompted.

• Source 5 is defaulted to iPod. For Source 5 (iPod) to be changed and

allocated for other inputs, go to “iPod Setup” menu under the “Source

Setup” menu. At “iPod Setup” menu, set “Enabled” to “No” – you can now

assign Source 5 with another input or setting as desired.

iPod MENU OPTIONS

There are two menu options for iPod – iPod Menu and Simple Mode. At

“iPod Menu”, iPod navigation will be done and guided through the OSD or

VFD of the T 748. At “Simple Mode” everything will be guided through your

iPod’s own display screen as you would do in normal iPod use.

The following is the procedure to switch between “iPod Menu” and “Simple

Mode” options

1 Press and hold [MENU] button in the front panel or AVR 4 for about 3

seconds.

2 “iPod Menu” is selected when the upper line of the VFD shows “iPod

Menu” and the lower line of the VFD shows “Playlists”. “iPod Menu” is the

default menu option.

3 Press and hold [MENU] button again and the upper line of the VFD

shows “iPod” and the lower line of the VFD shows “Simple Mode”. You are

now at Simple Mode.

iPod MENU

At “iPod Menu” mode, there are several available menu options that are

similar to what you can nd in an iPod player. The OSD shows the following

iPod Menu options – Playlists, Artists, Albums, Songs, Podcasts, Genres,

Composers and Audiobook. Use [ D/F ] to move up or down the iPod

menu selections. Navigate and select through these “iPod Menu” options as

you would when operating your iPod player independently.

NOTE

At “iPod Menu”, your docked iPod player’s click wheel and controls will

not be operational. Your iPod player will show in its display the NAD

logo. Use the corresponding front panel or AVR 4 buttons to navigate

through the “iPod Menu” options.

SIMPLE MODE

At “Simple Mode”, refer to your docked iPod player’s own display screen

to navigate and make full use of its features. Use your docked iPod’s own

click wheel and controls or the corresponding front panel or AVR 4 buttons

to select through the available options as displayed in your iPod player’s

display screen.

OPERATION

LISTENING TO YOUR iPod PLAYER

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 748 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 748

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info