Bedienungsanleitung NAD T 754 (Seite 23 von 32) (Englisch)

606564

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

2323

ENGLISH

USING THE T 754

• Enhanced-Stereo 2 (ST2)

All recordings reproduced in stereo via the surround speakers only (plus subwoofer, if any), assuming

these are configured in the current <Speakers Setup>. ST2 can prove useful in certain late-night or very

low-volume listening situations.

The following Surround Sound Modes require a specially encoded signal that must be present in digital

format to be decoded by the T 754. These modes are automatically switched on when the appropriate data

stream is detected selected in the setup menu of the source media.

• Dolby Digital

• Dolby Digital EX

• Dolby Digital Surround Sound EX

• DTS

• DTS ES Matrix

• DTS ES 6.1

Digital recordings in Dolby Digital or DTS formats are reproduced via the channels employed in the original

recording (up to the maximum channels present in the current <Speaker Settings> setup).

NOTE: The DVD player must be sending a Dolby Digital or DTS bit-stream from its digital output. Your DVD

player probably includes its own setup menu that (among other things) lets you select the default bit-

stream format, and usually includes an “Auto” setting that directs the player to choose the Dolby Digital/

DTS signal whenever these are available. In a few cases, you may have to set the player’s bit-stream

manually to “DD/DTS” or an equivalent. In the case of DVDs that carry both Dolby Digital and DTS, you

will select one or the other from the disc’s (not the player’s) main menu.

Note also that while most Dolby Digital recordings are 5.1-channel surround productions, older examples

may be multichannel, 2-channel, or even monaural; the T 754 will automatically reproduce the Dolby

Digital signal with the maximum number of channels available.

Both Dolby Digital/EX and DTS/ES 6.1-channel recordings are reproduced using the surround back channel,

if present in the current Speaker Settings setup; additionally, the T 754 creates surround-back signal from

non-EX/ES, 5.1-channel Dolby Digital and DTS recordings.

Dolby Digital EX creates six full-bandwidth output channels from any 5.1-channel Dolby Digital recordings.

The very best results occur with movies or other programs bearing the Dolby Digital Surround EX mark,

which are produced to take full advantage of this playback mode.

The table below indicates which listening modes are available with the two types of audio signal sources:

digital- or analog-input 2-channel (whether the actual signal is monaural, stereo or surround-encoded), and

digital-multichannel (Dolby Digital or DTS). Where a listening mode is not available to a given signal source,

it will not appear in the <Listening Mode> selection rotation.

2-ch analog or PCM Multi-ch. (DD/DTS)

Stereo Downmix

EARS --

-- Dolby Digital/EX or DTS/ES

Dolby Pro Logic II --

DTS Neo:6 --

Matrix 7.1 --

Enhanced Stereo I Enhanced Stereo I*

Enhanced Stereo II Enhanced Stereo II*

* downmixed signals

DISPLADISPLA

DISPLA

YING THE SIGNAL MODEYING THE SIGNAL MODE

YING THE SIGNAL MODE

Keying the front panel’s DISPLAY or HTR 2 remote's [DISP] key will display on the VFL the channel-mode of

the currently selected input signal, in the format “front/surround.subwoofer” (see “5 DISPLAY” in the

“Front Panel” section).

The following table shows examples of displays seen with various signal types:

Source Readout/OSD

Analog Analog

Digital PCM/HDCD Digital PCM/HDCD

Multichannel (Dolby Digital) Dolby D 3/2/.1 (full surround)

Dolby D 3/1/.1

Dolby D 2/0

etc.

Multichannel (DTS) dts 3/2/.1 (full surround)

dts 3/1/.1

dts 2/0

etc.

SELECTING LISTENING MODESSELECTING LISTENING MODES

SELECTING LISTENING MODES

Keying the HTR 2 remote's [SURR MODE] button steps through each of the T 754’s Listening Modes available

to the current input signal. It also momentarily displays the Listening Mode in the OSD.

NOTE: Changing the type of input signal may automatically change the Listening Mode: If the new signal

is a Dolby Digital or DTS recording, it will automatically invoke its native mode. The reverse is also true

if Dolby Digital or DTS was previously selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 754 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 754

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info