Bedienungsanleitung NAD T 758 (Seite 26 von 42) (Englisch)

745046

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

AMPLIFIER SETUP

If the surround back speakers are not used in the main zone, their surround

back amplier channels could be assigned for Main back, Main Front (Bi-

Amp) and Zone 2 use.

The Surround Back amplier is congurable through the following settings

Main Back: Assign as surround back speakers.

Main Front (Bi-Amp): Provide a bi-amp mode for the Main Front

speakers (Left and Right) speakers thus reproducing the Front Left and

Front Right amplier channel outputs.

Zone 2: Assign the surround back amplier channels to supply Zone 2

speaker level outputs from the surround back speaker terminals. Refer

also to the item about “ZONE 2 AT AUDIO PRE-OUT SURROUND BACK” in

the “ZONE CONTROLS” segment of the “OPERATION - USING THE T 758 -

MAIN MENU” section.

TRIGGER SETUP

The T 758 features a congurable +12V TRIGGER OUT that can be used to

activate a component or system it is fed into. It is used to turn on/o other

compliant devices.

The T 758’s +12V TRIGGER OUT is dependent on which mode it is associated

with. There are three choices where the +12V TRIGGER OUT can be assigned

and these are - Main, Zone 2 and Source Setup.

Main: +12V DC is available at +12V TRIGGER OUT when the T 758 is at

powered state.

Zone 2: When the Zone 2 is at powered state, +12V DC is available at

+12V TRIGGER OUT.

Source Setup: If Trigger Output is linked to “Source Setup”, +12V DC

is available at +12V TRIGGER OUT whenever the particularly assigned

Source is selected.

DELAY

The availability of +12V DC at Trigger Out can be regulated. If it is desired

that +12V DC is available without delay the moment Trigger Out is linked

to its assigned setting, set Delay to 0s. Otherwise, one can select through a

delay time of 1s to 15s.

LISTENING MODE SETUP

The T 758 has various listening mode options and is mostly congurable.

These are provided to reproduce a variety of sound eects depending

upon the content of the source to be played. Use a combination of [ A/S ],

[D/F ] or [ENTER] and keys to congure the following settings.

LISTENING MODES

The audio format as detected by the selected Source can be automatically

congured and processed through the following options:

DOLBY

Dolby Digital is the multi-channel digital signal format developed in the

Dolby laboratories. Discs bearing the Dolby Digital (double-D symbol) logo

were recorded with up to 5.1 channels of digital signals, reproducing a

much better sound quality, with dynamic and spatial sound sensations that

are much better than in the previous Dolby Surround.

A Dolby Digital audio input can be congured relative to its format as

follows

Stereo: If the detected audio is of Dolby stereo format, you can default

it to one of the following settings - Pro Logic, PLIIx Movie, PLIIx Music or

None.

Surround: If the detected audio is of Dolby Surround format, you can

default it to one of the following settings - Surround EX, PLIIx Movie,

PLIIx Music, Stereo Downmix or None.

None: If “None” is selected, the Dolby Digital signal will be defaulted

to the “Stereo” or “Surround” settings set forth at the “PCM” option. See

discussion below about “PCM”.

OPERATION

USING THE T 758  SETUP MENU

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 758 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 758

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info