Bedienungsanleitung NAD T 775 (Seite 17 von 46) (Englisch)

602917

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

SETUP MENU

The Setup Menu allows one to customize the operation of the T 775 to the

ancillary equipment used in one’s specic AV system. Unless your system

exactly matches the factory defaults as shown in the accompanying Quick

Start Guide, you will need to use the setup menu to congure the inputs of the

T 775.

At Setup Menu, the following are congurable – Source Setup, Speaker

Setup, Zone Setup, Amplier Setup, Trigger Setup, Listening Mode Setup,

Display Setup and A/V Presets.

To access and navigate through Setup Menu and its sub-menu selections,

please refer to and follow the directions stated in the sections ‘Display the

OSD’ and ‘Navigating the OSD and Making Changes.’

SOURCE SETUP

From Setup Menu, pressing will direct you to the Source Setup menu

wherein you could adjust allocate or change the settings of the following

– Source Setup (Normal View), Source Setup (Table View) and iPod Setup.

SOURCE SETUP (NORMAL VIEW)

The Source Setup (Normal View) menu makes it possible to set, allocate or

change the following settings.

SOURCE

The T 775 is equipped with ten congurable Sources. The settings for each

Source are dependent on the congurations set forth in the parameters for

that particular Source window.

To change or toggle through the Sources, scroll to ‘Source’, press button

and then ENTER or to move up or down the Source selections.

NOTE

 Source5isdefaultedtoiPod.ForSource5tobechangedandallocated

forotherinputs,goto‘iPodSetup’menuunderthe‘SourceSetup’menu.

AtiPodSetupmenu,set‘Enabled’to‘No’–youcannowassignSource5

to other inputs or settings as desired.

ENABLED

One can enable/disable a Source via this option. This is particularly useful

if only few Sources are used and one directly selects the Source from the

front panel, bypassing unused sources.

To enable or disable a particular Source, scroll to ‘Enabled’ and press

keys to select ‘Yes’ or ‘No’.

NAME

A new Name maybe assigned to a Source label. For example, if your DVD

player is attached to ‘Source 1’, it is possible to rename ‘Source 1’ to ‘DVD

Player.’

In order to rename the Source label, scroll to ‘Name’ and press to go the

character. Then, press to pick through the alphanumeric selections.

Press to move to the next character and at the same time save the

changes done on the current character. The name can be as long as twelve

characters.

The new Name will be shown in the VFD as well as on the OSD.

OPERATION

USING THE T 775  SETUP MENU

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 775 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info