Bedienungsanleitung NAD T 775 (Seite 28 von 46) (Englisch)

602917

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

DTS NEO: 6™ SURROUND

This mode applies the conventional 2-channel signals such as digital PCM

or analog stereo signals to the high precision digital matrix decoder used

for DTS-ES Matrix 6.1 to achieve 6.1-channel surround playback. DTS Neo: 6

surround includes two modes for selecting the optimum decoding of the

signal sources:

DTS NEO: 6 CINEMA : This method is ideal for the reproduction of

movies. The decoding takes place by emphasizing the separation in

order to achieve the same atmosphere with 2-channel, as with 6.1-

channel sources.

DTS NEO: 6 MUSIC : Mainly recommended for music reproduction.

The right and left front channels do not pass through the decoder and

are reproduced directly so there is no loss in sound quality, and the

eects of the right surround, left surround, central and back surround

channels add a natural sensation of expansion of the sound eld.

ENHANCED STEREO

Please refer to the same description of ‘ENHANCED STEREO’ under the

‘LISTENING MODES’ segment of the ‘OPERATION - USING THE T 775 - MAIN

MENU’.

DISPLAY SETUP

The Vacuum Fluorescent Display (VFD) and On-Screen Display (OSD) can be

shown in various ways by navigating through the parameters at the ‘Display

Setup’ menu. Use a combination of or ENTER and keys to step

through the ‘Display Setup’ menu items.

NOTE

 Thecongurationssetforthat‘DisplaySetup’arecarriedoverwhenever

itisenabledduringA/VPresetsetting.Pleaseseealsothesectionbelow

about‘AVPresets.’

VACUUM FLUORESCENT DISPLAY VFD

Display : Select ‘On’ to display all applicable data or characters at the

VFD. Nothing will be shown at VFD if ‘Temp’ is selected. At ‘Temp’ setting

however, whenever any of the front panel controls or their corresponding

keys in the remote control is activated, the appropriate VFD characters will

be shown temporarily and then fade away. Note that if any of the Zones

are at powered state, they will be continually shown at VFD even at ‘Temp’

setting.

Dimmer : If it is desired to reduce the brightness of the VFD, set Dimmer to

‘Dim’. Otherwise, select ‘Bright’ to return to normal VFD brightness.

Line 1, Line 2 : The VFD shows two main lines of data or characters. Line

2 is the line of data or characters located at the lower bottom of the VFD

while directly above it is Line 1. For both lines, one can select which display

could be shown by choosing through the following

Main Source : Shows the active Source.

Volume : Current Volume level is shown.

Listening Mode : Selected Listening Mode is shown.

Audio Src Format : Shows the active Source’s detected audio format.

Audio Codec: Displays the detected audio stream format like Analog,

PCM Surround, Dolby TrueHD, DTS-HD Master Audio and other formats.

Video Mode: Show the video resolution of the active input source.

Details shown include the video resolution with frame rate, Deep

Color bit rate and the luma and chroma components. For a better

understanding of these video details, consult with your NAD Audio

Specialist or your distributor’s technical department.

Zone 2-Zone 3-Zone 4 Source : The assigned Source for the

applicable Zone is shown.

O : Select ‘O’ if it is desired not to show any data at the applicable

Line.

Temp Line : Choose between Line 1 and Line 2 as the desired line where

VFD will be temporarily shown if ‘Temp’ is selected at ‘Display’ option as

described above.

ONSCREEN DISPLAY OSD

Temp Disp: This applies to the OSD that is temporarily shown at video out

whenever any of the front panel controls or their corresponding keys in the

remote control is activated. Set to ‘On’ if it is desired to show the applicable

OSD at the monitor/TV; otherwise, select ‘O’.

ABOUT DEEP COLOR AND XVYCC

DEEP COLOR

The T 775 has the support for 30-, 36-, and 48-bit RGB or “deep color”,

a specication that extends color depths beyond the capability of the

human eye to perceive them. Deep color expands the colors on the display

resulting to a vividness and accuracy that has never been before seen in

display technology. Deep Color eliminates the on-screen color banding,

for tonal transitions that are smooth and graduations of color that are very

subtle. It enables increased contrast ratio, and may represent many times

more shades of gray between black and white.

xvYCC

Extended-gamut YCC, or xvYCC as it is called, is a color space used in video

electronics that supports 1.8 times as many colors as the sRGB color space.

Color space is the range of colors based on the three primary colors (red,

green and blue, or RGB). An xvYCC display, along with Deep Color, can

display the complete range of colors that can be viewed by the human eye

and give a crystal clear picture that is full of clarity.

IMPORTANT NOTICE

 ForxvYCCandDeepColorsignaltransferpossible,thesourceand

TV/MonitormustbexvYCCandDeepColorcompatible.Ifeithersource

orTV/MonitordoesnotsupportxvYCCandDeepColor,thenyoucannot

fullyenjoythewidecolorgamutandhighbitdepththatxvYCCand

DeepColoroer.

OPERATION

USING THE T 775  SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD T 775 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info