Bedienungsanleitung NAD T 777 (Seite 9 von 48) (Englisch)

493494

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

4 7.1 CHANNEL INPUT

• Connect to the corresponding analog audio output of a

multichannel source component such as a DVD-Audio or

multichannel-SACD player or external multichannel decoder (disc

copy protected formats only allow analog signal transfer). Typically,

these sources will produce 5.1-channel output, in which case the

Surround Back jacks are left unconnected. The signal present at

these jacks can be heard by selecting Source 7 (7.1 CHANNEL INPUT

is defaulted to this Source).

• There is no bass-management or other processing (other than

master-volume control) available to this 7.1 channel input.

• While the multichannel audio output of a DVD/BD player can be

connected to these jacks, using the T 777’s own Dolby Digital and

DTS decoding and digital-analog converters via a digital connection

will usually produce superior results.

5 XM MODULE INPUT (120V version model only)

With XM radio, there are more than 100 channels of music, news, sports,

comedy, talk and entertainment. You will nd that the coverage is

continent wide. The music quality is digital with many commercial-free

music channels.

• Connect XM radio cable to this socket. Follow the instructions that

came with your XM radio.

• Refer also to the “LISTENING TO XM RADIO” segment of the

“OPERATION” section.

NOTE

The external XM radio is not supplied with your T 777.

DAB MODULE INPUT (230V version model only)

The T 777 is compatible only with the NAD DAB Adaptor module

models DB 1 or DB 2. With DAB, you can receive CD-like quality

programs without any annoying interference and signal distortion.

• Plug-in the other end of the Mini-Din connector from the NAD DAB

Adaptor module output port into this socket.

• Refer also to the item about “LISTENING TO DAB RADIO” segment of

the “OPERATION” section.

NOTE

The external NAD DAB Adaptor module is not supplied with your T 777.

6 SOFT CLIPPING

• Enables NAD’s proprietary Soft Clipping circuitry on all channels.

• At ON position, Soft Clipping gently limits the output of the T 777 to

minimize audible distortion should the T 777 be over-driven.

• Soft Clipping may simply be left ON at all times to reduce the

likelihood of audible distortion from excessive volume settings.

However, for critical listening and to preserve optimum dynamics,

you may wish to defeat it by setting this switch to OFF.

7 RS 232

NAD is a certied partner of AMX and Crestron and fully supports

these external devices. Check out the NAD website for information

about AMX and Crestron compatibility with NAD. See your NAD audio

specialist for more information.

• Connect this interface using RS-232 serial cable (not supplied) to

any Windows compatible PC to allow remote control of the T 777

via compatible external controllers.

• Refer to the NAD website for information about RS232 Protocol

documents and PC interface program.

8 FM ANTENNA TERMINAL

• The supplied wire “dipole” FM antenna will connect to the FM

connector using the supplied “balun” adapter. It will usually work

best when mounted on a vertical surface such as a wall, with arms

fully outstretched forming a horizontal “T” perpendicular to the

origin point of the signal.

AM ANTENNA TERMINAL

The AM loop antenna supplied with the T 777 (or a suitable

replacement) is required for AM reception.

• Connect the supplied AM loop antenna to these terminals. If an

external AM antenna is used, make connections to the AM and GND

terminals in accordance with the instructions supplied with the

antenna.

• Testing dierent positions for the antenna may improve reception;

vertical orientation will usually produce the best results. Antenna

proximity to large metal objects (appliances, radiators) may impair

reception, as will as attempts to lengthen the wire to the loop.

• Refer also to the item about ASSEMBLING THE LOOP ANTENNA at

the LISTENING TO AM/FM RADIO section of the OPERATION page.

9 +12V TRIGGER OUT

The T 777 has three +12V TRIGGER OUT ports (OUT 1, OUT2 and OUT3)

that can be congured to supply +12V DC to a linked component or

system. See discussion on “Trigger Setup” at the “Setup Menu” literature

for guidelines on how to congure +12V TRIGGER IN/OUT.

• Use a 3.5mm mini-jack connector to pass +12 volts at a maximum

current of 50 milliamps to an auxiliary equipment such as a

multichannel amplier or subwoofer. The center conductor (hot) of

the 3.5mm jack is the control signal. The outside conductor (shield)

is the ground return-path.

• This output will be 12V when the T 777 is ON and 0V when the unit

is either OFF or in standby mode.

+12V TRIGGER IN

With this input triggered by a 12V DC supply, the T 777 can be switched

ON remotely from standby mode by compatible devices such as

ampliers, preampliers, receivers, etc. If the 12V DC supply is cut o,

the T 777 will return to standby mode.

• Connect this +12V Trigger input to the remote device’s

corresponding +12V DC output jack using a mono cable with

3.5mm male plug. The controlling device must be equipped with a

+12V trigger output to use this feature.

10 IR IN/IR OUT 1-3

These mini-jacks accept and output remote-controlled codes in

electrical format, using industry-standard protocols, for use with “IR-

repeater” and multi-room systems and related technologies.

• All NAD products with IR IN/IR OUT features are fully compatible

with the T 777. For non-NAD models, please check with your other

product’s service specialists as to their compatibility to the T 777’s IR

features.

IR IN

• This input is connected to the output of an IR (infrared) repeater

(Xantech or similar) or the IR output of another compatible device

to allow control of the T 777 from a remote location.

IR OUT 1, IR OUT 2

• Connect IR OUT 1 (and/or IR OUT 2) to the IR IN jack of a compatible

device.

• Command and control the linked compatible device by directing its

own remote control to T 777’s infrared receiver.

IDENTIFICATION OF CONTROLS

REAR PANEL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

NAD T 777 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 777

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info