Bedienungsanleitung NAD T 785 (Seite 11 von 52) (Englisch)

602918

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

5 AUDIO 3-4 OUT/VIDEO 3-4 OUT/S-VIDEO 3-4 OUT: Connect the T 785’s

AUDIO 3 OUT/VIDEO 3 OUT/S-VIDEO 3 OUT or AUDIO 4 OUT/VIDEO 4

OUT/S-VIDEO 4 OUT jacks to the analog audio/video input of a recording

component such as a cassette deck, DVD recorder or to an outboard audio/

video processor. Connect the T 785’s AUDIO 3 IN/VIDEO 3 IN/S-VIDEO 3

IN or AUDIO 4 IN/VIDEO 4 IN/S-VIDEO 4 IN jacks to the component’s

corresponding output.

The signal present at these T 785 AUDIO/VIDEO OUT jacks is determined

by the source last selected via the front panel Source keys or the HTRC 1’s

input select keys with the exception of Source 3 or Source 4. There will be

no output at AUDIO 3 OUT/VIDEO 3 OUT/S-VIDEO 3 OUT when Source 3

(AUDIO 3 IN/VIDEO 3 IN/S VIDEO 3 IN) is selected. Likewise, there will be

no output at AUDIO 4 OUT/ VIDEO 4 OUT/S-VIDEO 4 OUT when Source

4 (AUDIO 4 IN/VIDEO 4 IN/S VIDEO 4 IN) is the active source input.. This

prevents feedback through the recording component thereby preventing

possible damage to your speakers.

When congured, AUDIO 3 OUT/VIDEO 3 OUT/S-VIDEO 3 OUT and

AUDIO 4 OUT/VIDEO 4 OUT/S-VIDEO 4 OUT are the same assigned ports

for Zone 3 and Zone 4 respectively. See also Zone output description

below.

6 MONITOR (S-VIDEO, VIDEO) : Connect to video input of the monitor/

television using quality dual-RCA and/or S-Video cables designed for

video signals. In general, the S-Video connection is superior and should

be used if your TV/monitor provides the corresponding input.

7 AUDIO 1-5 IN/VIDEO 1-5 IN/S-VIDEO 1-5 IN, AUDIO 6 IN : These

comprise the T 785’s principal input. Connect S-Video, composite video,

and analog stereo audio from source components such as DVD players

and HDTV/satellite tuners.

AUDIO 3-4 IN/VIDEO 3-4 IN/S-VIDEO 3-4 IN may be used with

recording components such as videocassette or DVD-recorders by

connecting these components’ record-output to the corresponding

T 785 AUDIO 3 IN/VIDEO 3 IN/S-VIDEO 3 IN or AUDIO 4 IN/VIDEO

4 IN/S-VIDEO 4 IN jacks. AUDIO 3 IN/VIDEO 3 IN/S-VIDEO 3 IN or

AUDIO 4 IN/VIDEO 4 IN/S-VIDEO 4 IN may freely be used for play-only

components, in which case their corresponding OUT jacks would

remain unconnected. Refer also to AUDIO 3 OUT/ VIDEO 3 OUT/S-VIDEO

3 OUT, AUDIO 4 OUT/VIDEO 4 OUT/S-VIDEO 4 OUT discussion above.

AUDIO 6 is ideal for the connection of the analog output of line-level

audio sources like a CD player or Stereo tuner.

8 7.1 CH INPUT : Connect to the corresponding analog audio outputs

of a multichannel source component such as a DVD-Audio or

multichannel-SACD player or external multichannel decoder (disc copy

protected formats only allow analog signal transfer). Typically, these

sources will produce 5.1-channel output, in which case the Surround

Back jacks are left unconnected. The signals present at these jacks may

be heard by selecting Source 7 (External 7.1 audio input is defaulted to

this Source).

There is no bass-management or other processing (other than master-

volume control) available to this 7.1 CH. Input. While the multi-channel

audio outputs of a DVD-Video player can be connected to these jacks,

using the T 785’s own Dolby Digital and DTS decoding and digital-analog

converters via a digital connection will usually produce superior results.

9 XM MODULE INPUT (120V version only): Connect XM radio cable

to this socket. Follow the instructions that came with your XM radio.

With XM radio, there are more than 100 channels of music, news, sports,

comedy, talk and entertainment. You will nd that the coverage is

continent wide. The music quality is digital with many commercial-free

music channels.

NOTE

 TheexternalXMradioisnotsuppliedwithyourT785.

DAB MODULE INPUT (230V version only): Plug-in the other end

of the Mini-Din connector from the NAD DAB Adaptor DB 1 module

output port into this socket. The T 785 is compatible only with NAD

DAB Adaptor DB 1 so check with your NAD dealer for this module’s

availability. With DAB, you can receive CD-like quality programs without

any annoying interference and signal distortion.

NOTE

 Theexternal“NADDABAdaptorDB1module”isnotsuppliedwithyourT785.

10 RS-232 : Connect this interface via RS-232 serial cable (not supplied)

to any Windows® compatible PC to allow remote control of the T 785

through NAD’s proprietary PC software or other compatible external

controllers. Please log on to www.nadelectronics.com/software for the

latest PC interface control software. NAD is a certied partner of AMX

and Crestron and fully supports these external devices. See your NAD

audio specialist for more information

11 SOFT CLIPPING : Enables NAD’s proprietary Soft Clipping circuitry on

all channels. At ON position, Soft Clipping gently limits the output of

the T 785 to minimize audible distortion should the A/V Receiver be

over-driven. Soft Clipping may simply be left ON at all times to reduce

the likelihood of audible distortion from excessive volume settings.

However, for critical listening and to preserve optimum dynamics, you

may wish to defeat it by setting this switch OFF.

12 +12 V TRIGGER OUT : There are three congurable +12V TRIGGER

OUTPUT. Use a 3.5mm mini-jack connector to pass +12 volts at a

maximum current of 50 milliamps to auxiliary equipment such as a

multichannel amplier or subwoofer. The center conductor (hot) of the

3.5mm jack is the control signal. The outside conductor (shield) is the

ground return-path.

TRIGGER IN accepts 12V Trigger output of compatible components

such as power controllers and home automation devices.

TRIGGER OFF/AUTO. When at AUTO position, the T 785 selects the

12V Trigger Input to turn ON (if so assigned at the ‘Trigger Setup’ menu)

and at the same time disables the HTRC 1 and front panel’s ON/OFF

function. When at OFF position, the trigger input is disabled.

WARNING

 IfAutoTriggerINatTriggerSetupmenuisassignedto‘Main’or‘All’and

theTRIGGERswitchissetto‘AUTO’mode,thestandbybuttoninthefront

panelaswellasthecorrespondingON/OFFfunctionkeysintheHTRC1

remotecontrolwillbedisabledeectivelyhandingthisfunctiontoan

externalcontroller.SwitchTRIGGERto‘OFF’tomaintainnormalpower

ON/OFFfunctionprocedures.

See discussion on ‘Trigger Setup’ at the ‘Setup Menu’ literature for

guidelines on how to congure TRIGGER IN/OUT.

IDENTIFICATION OF CONTROLS

REAR PANEL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

NAD T 785 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 785

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info