Bedienungsanleitung NAD T748v2 (Seite 6 von 40) (Englisch)

602906

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

IDENTIFICATION OF CONTROLS

FRONT PANEL

1 STANDBY BUTTON

• Press this button to switch ON the T 748 from standby mode. The

Standby LED indicator will turn from amber to blue and illuminate

the VFD. Pressing the STANDBY button again turns the unit back to

standby mode.

2 STANDBY LED

• This indicator will light up amber when the T 748 is at standby

mode.

• When the T 748 is powered up from standby mode, this indicator

will illuminate blue.

3 NAVIGATION and ENTER BUTTONS

The navigation [ a/s/d/f ] and [ENTER] buttons have various

applications specic to given modes. The middle round button is

designated as [ENTER] button; this is normally pressed to complete a

selection, procedure, sequence or other applicable functions.

AM/FM mode

Toggle [ENTER] button to switch between “Tune” and “Preset” mode.

Select “Tune” mode.

• Pressing momentarily the [ a/s ] buttons will manually scan the AM

or FM band.

• Press and hold [ a/s ] for more than 2 seconds to search up/

down;the T 748’s tuner will stop at the next suciently strong signal

it encounters.

• Note that this function “wraps” - that is, it will continue to search

from one end of the AM or FM band to the other until it stops at a

strong signal.

Toggle [ENTER] button to switch between “Tune” and “Preset” mode.

Select “Preset” mode.

• Use [ d/f ] to step up or down AM/FM Presets. Unused presets are

skipped over. Note that Presets must have been previously stored.

Refer also to the item about STORING PRESETS (AM/FM) at the

LISTENING TO AM/FM RADIO section of the OPERATION page.

DAB mode (230V version model only)

• Use front panel [ a/s ] and [ENTER] buttons in combination with

[MENU] button to select through applicable DAB menu options.

4 MENU

• Press to activate or deactivate OSD menu.

• At DAB mode, use the [MENU] button in combination with the front

panel [ a/s ] and [ENTER] buttons to activate DAB menu options.

5 LISTENING MODE

• Toggle to select through the various Listening mode options.

• Depending on the format of the currently selected input (digital

or analog, stereo or multichannel), various listening modes are

available.

• Refer also to the item about LISTENING MODE under the USING THE

T 748 - MAIN MENU segment of the OPERATION section.

6 VACUUM FLUORESCENT DISPLAY (VFD)

• Displays visual information about the current settings like the active

Source, volume level, listening mode, audio format, applicable RDS/

DAB as well as iPod-related display information and other related

indicators.

• Refer also to the item about DISPLAY SETUP under the USING THE

T 748 - SETUP MENU segment of the OPERATION section.

7 REMOTE SENSOR

• Point the AVR 4 remote control at the remote sensor and press the

buttons.

• Do not expose the remote sensor of the T 748 to a strong light

source such as direct sunlight or illumination. If you do so, you may

not be able to operate the T 748 with the remote control.

Distance: About 23ft (7m) from the front of the remote sensor.

Angle: About 30° in each direction of the front of the remote sensor.

3 4 5 6 7 8

D ECB

1 2

1211

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T748v2 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T748v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info