Bedienungsanleitung NAD T748v2 (Seite 22 von 40) (Englisch)

602906

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

When devices that support HDMI Control (CEC) are connected, the

following modes of operation can be executed via the T 748 or the external

device using any of the device’s remote control.

Source (On/O): At “On” setting, the T 748 will automatically switch

sources if another CEC device requests a Source change.

For example, if PLAY is pressed on a BD Player with CEC, the T 748

and TV with CEC will automatically switch to their respective input

connections – the T 748 switching to the HDMI input where the BD

Player is connected while the TV will switch to its input where the

T 748’s HDMI MONITOR OUT is connected. This completes the auto-

conguration – the BD Player is automatically played back using the

T 748 and TV.

Power (On/O): At “On” setting, the T 748 will automatically go to

standby mode if it receives a CEC standby command. On the other

hand, if the T 748 receives a CEC power up command, the T 748 will

correspondingly switch ON from standby mode.

Volume (On/O): At “On” setting, the T 748 will respond to CEC volume

and mute commands.

For the above Control modes, the T 748 will not respond to any CEC

command if the particular mode is set to “O”.

HDMI AUDIO OUT

Amp: HDMI Audio stream is sent to the T 748. Audio output is manifested

through the T 748’s speakers.

TV: HDMI Audio stream is sent to the TV. Audio output is manifested

through the TV’s speakers.

HDMI ARC

HDMI ARC stands for HDMI Audio Return Channel. HDMI ARC function

enables an HDMI-ARC compatible TV to send audio data stream to the

T 748. Audio output is manifested through the T 748’s speakers.

• HDMI ARC is enabled only with “Volume” setting set to “On”. If

“Volume” is set to “O”, HDMI ARC is automatically set to “O”.

• “HDMI ARC” is shown in the VFD when it is set to “On” and active.

IMPORTANT NOTES

• TheCECorHDMIARCresponseamongthedevicesmayvaryormaynot

be achieved as expected. This may depend upon the other devices’ setup

conguration, compatibility or capability.

• AudioandvideowillcontinuouslystreamfromtheHDMIsourcewith

CEC to the TV with CEC even if the T 748 is at standby mode.

LISTENING MODE SETUP

The T 748 has various listening mode options and is mostly congurable.

These are provided to reproduce a variety of sound eects depending upon

the content of the source to be played. Use a combination of [ A/S/D/F ] to

congure the following settings.

LISTENING MODES

The audio format as detected by the selected Source can be automatically

congured and processed through the following options:

DOLBY DIGITAL

Dolby Digital is the multi-channel digital signal format developed in the

Dolby laboratories. Discs bearing the Dolby Digital (double-D symbol) logo

were recorded with up to 5.1 channels of digital signals, reproducing a

much better sound quality, with dynamic and spatial sound sensations that

are much better than in the previous Dolby Surround.

A Dolby Digital audio input can be congured relative to its format as

follows

Stereo: If the detected audio is of Dolby stereo format, you can default

it to one of the following settings - Stereo, PLIIx Movie, PLIIx Music, PLIIx

Game, Neo:6 Cinema or Neo:6 Music.

Surround: If the detected audio is of Dolby Surround format, you can

default it to one of the following settings - Stereo, PLIIx Movie, PLIIx

Music, Dolby D Ex,Neo:6 Cinema or None.

None: If “None” is selected, the Dolby Digital signal will be defaulted

to the “Stereo” or “Surround” settings set forth at the “PCM” option. See

discussion below about “PCM”.

DOLBY DIGITAL SURROUND MODES

The following are further descriptions of Dolby Digital surround modes.

DOLBY DIGITAL PLUS

Dolby Digital Plus is the next-generation audio technology for all high-

denition programming and media. It combines the eciency to meet

future broadcast demands with the power and exibility to realize the full

audio potential expected in the upcoming high-denition era. Built on

Dolby Digital, the multi-channel audio standard for DVD and HD broadcasts

worldwide, Dolby Digital Plus was designed for the next-generation A/V

receivers but remains fully compatible with all current A/V receivers.

Dolby Digital Plus delivers multi-channel audio programs of up to 7.1

channels and supports multiple programs in a single encoded bitstream

with the maximum bit rate potential of up to 6 Mbps and the maximum bit

rate performance of up to 3 Mbps on HD DVD and 1.7 Mbps on Blu-ray Disc.

It outputs Dolby Digital bitstreams for playback on existing Dolby Digital

systems. Dolby Digital Plus can accurately reproduce the sound originally

intended by directors and producers.

It also features multi-channel sound with discrete channel output,

interactive mixing and streaming capability in advanced systems.

Supported by High-Denition Media Interface (HDMI), a single-cable digital

connection is possible for high-denition audio and video.

OPERATION

USING THE T 748  SETUP MENU

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD T748v2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T748v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info