Bedienungsanleitung NAD T748v2 (Seite 35 von 40) (Englisch)

602906

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

The T 748 is equipped with a data port in the rear panel where an optional

“NAD IPD Dock for iPod” (NAD IPD) can be plugged in. With the NAD IPD

linking the T 748 with your own iPod player, you can enjoy listening to your

favorite tracks and playlists as well as view applicable still image and video

playback.

You can control your iPod player using the assigned buttons in the T 748

front panel. And with the corresponding AVR 4 remote control function

keys, you can select the materials stored in your iPod for playback as well as

access many of its functions even from across the room. The optional NAD

IPD also charges your iPod player while it is connected to the T 748.

NOTES

• “NADIPDDockforiPod”(NADIPD)currentlyhastwoversions-theNAD

IPD 1 and NAD IPD 2. These two NAD IPD models and later variants are

compatible with the T 748.

• NADIPDandiPodplayerarenotsuppliedwithyourT748.

• iPodplayerfunctions,featuresandplaybackcapabilitiesaccessible

through T 748 may vary depending on your iPod player model.

• WhenusingtheAVR4tocontroltheiPodfunctions,makesurethatthe

Device Selector is set to “MP.”

CONNECTING THE OPTIONAL NAD IPD AND

iPod PLAYER TO THE T 748

Make sure that all the devices are unplugged before making the

connections.

1 Connect the NAD IPD’s DATA PORT to the corresponding “MP DOCK”

data port of the T 748.

2 Connect also the NAD IPD’s S-Video out and audio out to the T 748

AUDIO 2/S-VIDEO input (the default iPod source allocation in the T 748).

3 Dock your iPod player into the NAD IPD.

NAVIGATING THE IPOD PLAYER’S FUNCTIONS AND FEATURES

After linking together your iPod player, NAD IPD and the T 748, you can now

plug them IN to their applicable power sources.

1 With your T 748, iPod player and NAD IPD all at power ON state, select

SOURCE 5 (iPod) of your T 748. Your iPod player will show in its display

the NAD logo and below it “OK to disconnect.” On the other hand, the

T 748 VFD will show in the upper line “iPod Menu” and the lower line

“Playlists”. The lower line will vary depending on the current menu

selected. At the same time, the T 748 OSD will display the whole iPod

Menu selections like Playlists, Artist, Albums, Genres, Songs, Composers,

Audiobooks and Podcasts.

2 Navigate through the iPod menu selections using a combination of the

[ A/S/D/F ] buttons.

NOTES

• ToexitfromtheiPodMenuatSource5(iPod),press[ A ] bringing you to

“Menu Select” OSD. Follow the instructions as prompted.

• Source5isdefaultedtoiPod.ForSource5(iPod)tobechangedand

allocated for other inputs, go to “iPod Setup” menu under the “Source

Setup” menu. At “iPod Setup” menu, set “Enabled” to “No” – you can now

assign Source 5 with another input or setting as desired.

CONTROL FEATURES AND SETTINGS

The following control functions and settings are selectable or enabled

using the front panel and AVR 4 remote control buttons. Since the AVR 4

will be the primary controller in most cases, we will focus on remote-

controlled operations.

Note that other NAD IPD models, like the NAD IPD 2, have their own remote

controls. The controls below also apply to the corresponding buttons of the

remote controls of such applicable NAD IPD models.

ENTER

Press [ENTER] to select an option or start playback.

DISP

• During playback, toggle [DISP] key of AVR 4 to show in the T 748 VFD

upper line the Song title, Artist Name and Album title.

• If there is no information available, the display will show “Unknown

Song”, “Unknown Artist” or “Unknown Album” as applicable. Aside from

this information, the lower line will display the current title’s song

number allocation and time elapsed.

9/0

• During playback or PAUSE mode, press and hold [ 9/0 ] for fast

forward or backward scanning of current song. Release button to

resume normal playback.

• Press [ 0 ] to skip forward to the next song or [ 9 ] to skip back to

the previous song.

 j  PAUSE /  4  PLAY

• Press PAUSE [ j ] during playback to stop playback temporarily. Resume

play by pressing [ 4 ] (Play).

• Toggle [ 4 ] (Play) to alternately switch from PLAY to PAUSE mode and

vice-versa.

OPERATION

LISTENING TO YOUR iPod PLAYER

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T748v2 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T748v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info