Bedienungsanleitung NAD VISO TWO (Seite 11 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

9 HDMI OUT: Connect the HDMI OUT to a HDTV or projector with

HDMI input.

WARNING

 BeforeconnectinganddisconnectingtheHDMIcable,boththe

VISO TWO and the ancillary source must be powered OFF and

unpluggedfromtheACoutlet.Failuretoobservethispracticemaycause

permanentdamagetotheequipmentconnectedviatheHDMIsocket.

IMPORTANT NOTICE

 WhenplayingDTS(orDolbyDigital)material,ensurethatthevolumeof

yourHDMIequippedTVismuted.Theremaybearushingnoiseheardif

yourTVisnotcapableofdecodingtheDTS(orDolbyDigital)Bitstream;

mostTVsdonothavethiscapability.

10 OPTICAL OUT: Connect the optical digital OUT port to the

corresponding S/PDIF digital input of a compatible device such as CD

recorders, receivers, computer soundcard or other digital processors.

11 LOAD SW: For future software program updates, use this button

in combination with RS232 to upgrade the VISO TWO. Owners

who register their VISO TWO in our international website www.

nadelectronics.com will be advised of updates. Your custom installer

or dealer can assist you in the proper upgrade and setup of your

VISO TWO.

12 RS-232: Connect this interface via RS-232 serial cable (not supplied) to any

Windows® compatible PC to allow remote control of the VISO TWO through

NAD’s proprietary PC software or other compatible external controllers.

NAD is a certied partner of AMX and Crestron and fully supports these

external devices. See your NAD audio specialist for more information.

13 RESET: In the unlikely event that the VISO TWO becomes inoperable or

hangs up, press this button to reset the VISO TWO.

14 IEC AC MAINS (POWER) INPUT: The VISO TWO comes supplied

with a separate AC Mains cable. Before connecting the cable to a live

wall socket ensure that it is rmly connected to the VISO TWO’s AC

Mains input socket rst. Always disconnect the AC Mains cable plug

from the live wall socket rst, before disconnecting the cable from the

VISO TWO’s Mains input socket.

15 MONITOR (S-VIDEO, VIDEO): Connect to video input of a monitor/

television using quality dual-RCA and/or S-Video cables designed for

video signals. In general, the S-Video connection is superior and should

be used if your TV/monitor provides the corresponding input.

16 COMPONENT VIDEO IN, COMPONENT VIDEO OUT: Connect the

Component Video IN to Component Video outputs from compatible

source components, typically a DVD player and terrestrial or satellite HDTV

tuner. Connect Component Video OUT to the Component Video input

of a compatible video monitor/TV. Be sure to observe consistency in

connecting the Y, Cb/Pb, Cr/Pr jacks to the corresponding sources/inputs.

17 IR IN: This input is connected to the output of an IR (infrared) repeater

(Xantech or similar) or the IR output of another component to allow

control of the VISO TWO from a remote location. Ask your dealer or

custom installer for further details.

18 SCART/RGB OUT (Euro model/PAL only): Connect the VISO TWO’s

“SCART/RGB OUT” to the SCART/RGB video input of a compatible

video monitor/TV. Be sure to observe the correct orientation of the

SCART/RGB plug. Make sure also to set “Video Output” to “RGB” at the

“Disc Video” menu for stable video at SCART/RGB OUT.

19 XM MODULE INPUT (North America version only): Connect XM

radio cable to this socket. Follow the instructions that came with your

XM radio. With XM radio, there are more than 100 channels of music,

news, sports, comedy, talk and entertainment. You will nd that the

coverage is continent wide. The music quality is digital with many

commercial-free music channels.

NOTE

• Questions?Visitwww.xmradio.com

 ListenerscansubscribebyvisitingXMontheWebatwww.xmradio.com

orbycalling(atthetimeofprintingthismanual)XM’sListenerCareat

(800)8539696.BereadywithyourRadioIDthatcanbefoundonthe

radiobyselectingChannel0.

20 SWITCHED AC OUTLET: This convenience outlet can supply switched

power to another component or accessory. It is powered ON and OFF

by the front panel POWER button or by the HTR 6’s ON and OFF keys.

IDENTIFICATION OF CONTROLS

REAR PANEL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD VISO TWO Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info