Bedienungsanleitung Naim CD5 XS (Seite 9 von 18) (Englisch)

651537

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

CDX2

8.2 CDX2 Connected to XPS Power Supply

Note: When used with an external power supply the CDX2

player must be disconnected from the mains. Disconnect

the player from the mains before connecting the power

supply.

Note: If a CD 555PS Power Supply is used to power a

CDX2 player use only power supply output Socket 1.

CD Burndy Cable

9. CDX2 In Use

9.1 Signal Output Selection

The CDX2 can provide either analogue or S/PDIF format

digital signal output. The analogue output is carried by

either a single DIN socket or a pair of RCA phono sockets.

The digital output is carried by a single 75Ω BNC socket.

Digital and analogue outputs may not be used

simultaneously. Selection is achieved by using the rear panel

mounted switch. The CDX2 must be switched o before

the output selection switch is operated. Ensure the correct

cables are connected before switching the

CDX2 back on.

Note: Your local retailer will be able to oer advice on

digital output cables.

9.2 Disc Loading

To load a compact disc pull open the CD drawer using the

handle on the left hand side of the player. Place the disc

on the platter followed by the magnetic puck. Do not use

a puck from any other Naim CD player. Dierent Naim CD

players use dissimilar pucks.

Note: If an HDCD® encoded compact disc is loaded the

CDX2 will automatically recognise and decode it. The

display will temporarily read HDCD after play is selected.

9.3 Power Supply Upgrade

The CDX2 can be upgraded by the addition of a CD 555PS,

XPS or XP5 XS Power Supply. The external supply takes

over from the internal power supply of the CDX2 and oers

both a greater number of separate supplies and more

sophisticated voltage regulation.

The external supply is connected to the CDX2 via a heavy

duty “Burndy” cable. Switch o both the power supply and

CDX2 when making connections and remove the CDX2

mains cable. Remove the CDX2 link plug and connect the

Burndy cable ensuring that the connectors are securely

attached and their twist lock mechanisms are engaged.

Switch on the power supply from its front panel power

button. After a short while the CDX2 will function as normal.

9.4 Player Maintenance

It is important for reliable operation of the CDX2 to ensure

that the surfaces of the transport platter and the underside

of the puck are free of dust or debris which can prevent the

disc from sitting properly and cause it to slip.

To clean the transport platter, take a piece of Blu-Tack and

lightly apply it to the top surface of the magnetic metal hub,

picking up any material attached to it. Brush the plastic

outer edge lightly with your nger or a soft brush to ensure

that it is dust and particle free. Similarly, clean the puck

with Blu-Tack, to remove debris from its underside. Do not,

under any circumstances, use any solvents or uids for the

cleaning process.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim CD5 XS Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim CD5 XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info