Bedienungsanleitung Naim CDX (Seite 4 von 18) (Englisch)

651536

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

3. General Installation

Naim equipment is designed to oer the nest performance

possible avoiding compromise wherever practical. This can

lead to circumstances that may be unfamiliar. The notes that

follow contain advice specically related to Naim equipment

as well as more general warnings about the use of domestic

audio products. Please read them carefully.

3.1 Siting The Equipment

In order to reduce the risk of hum audible from the

loudspeakers, power supplies and power ampliers

should be located a reasonable distance away from

other equipment. The maximum separation distance for

connected equipment is that allowed by the standard

interconnect lead.

Some Naim equipment is extremely heavy. Check the

weight of the equipment prior to lifting and if necessary use

more than one person so that it can be moved safely. Ensure

that your equipment rack or table can easily support the

weight and is stable.

3.2 Switching On

Source components and power supplies should be switched

on before the power ampliers. Always switch ampliers o

and wait a minute before connecting or disconnecting any

leads. Always use the power switch on the product rather

than a mains outlet switch.

A “thump” may be heard from the loudspeakers as power

ampliers are switched on. This is normal, will not cause

any loudspeaker damage and does not point to any fault

or problem. A mild “pop” may also be heard shortly after

equipment is switched o.

3.3 Running In

Naim equipment takes a considerable time to run in before

it performs at its best. The duration varies, but under some

conditions the sound may continue to improve for over a

month. Better and more consistent performance will be

achieved if the system is left switched on for long periods.

It is worth remembering however that equipment left

connected to the mains can be damaged by lightning.

3.4 Radio Interference

In some circumstances, depending on where you live

and the earthing arrangements in your home, you may

experience radio frequency interference. Controls on

broadcasting in some territories allow very high levels of

radio frequency radiation and both the choice and exact

siting of equipment may be critical. Susceptibility to radio

frequency interference is related to the wide internal

bandwidth necessary for high sound quality. A radio

frequency lter kit is available for some Naim equipment but

sound quality will be progressively compromised as more

elements of the kit are tted.

3.5 Lightning Precautions

Your Naim hi- system can be damaged by lightning and

should be turned o and disconnected from the mains when

there is risk of lightning strike. For complete protection all

mains plugs and any aerial cables should be disconnected

when not in use.

3.6 Problems?

Consumer protection varies from country to country. In

most territories a retailer must be prepared to take back

any equipment he has sold if it cannot be made to work

satisfactorily. A problem may be due to a fault in the

system or its installation so it is essential to make full use

of your dealer’s diagnostic skills. Please contact your local

distributor, or Naim Audio directly, if any diculties cannot

be resolved.

Some Naim equipment is made in special versions for

dierent territories and this makes it impracticable to

arrange international guarantees. Please establish the local

guarantee arrangements with your retailer. Contact Naim

Audio directly for help and advice if necessary.

3.7 Service and Updates

It is essential that repairs and updates are only carried

out by an authorised Naim retailer or at the factory by

Naim itself. Many components are custom made, tested

or matched and appropriate replacements are often

unobtainable from other sources.

Direct contact to Naim for service or update information

should be made initially through Customer Services:

Tel: +44 (0)1722 426600

Email: info@naimaudio.com

Please quote the product serial number (found on its rear

panel) in all correspondence.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim CDX Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim CDX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info