Bedienungsanleitung Naim CDX (Seite 13 von 18) (Englisch)

651536

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

E11

16. CD Player Control and Operation

The operation and control of all Naim CD players is based on a common user interface. This section of the manual describes

the user interface, drawing attention to dierences between players where they occur.

The CD player control buttons are duplicated on the remote control handset which may also provide some extra functions.

The handset also provides CD programming facilities. See Sections 17 and 18 for more information.

16.1 Player Controls

door: Opens and closes the door (CD555 only).

disp: Scrolls through the display options of track,

time and display o (CD555 only).

Note: The CDX2, CD5 XS and CD5si display options can

be scrolled by pressing the remote handset disp key.

prev: Steps through the disc backwards, either one

track at a time, or sequentially if the button is

held.

next: Operates in the same way as the prev button,

but moving forwards instead of backwards.

pause: Pauses play. Pressing pause a second time will

resume play. The pause button indicator will

ash when pause is selected (CD555 only).

Note: The CDX2, CD5 XS and CD5si can be paused by

pressing the remote handset pause key.

Note: If a player is paused for more than 10 minutes it

will enter a “static pause” mode in which the transport

deactivates to reduce wear. The player can be left in static

pause mode indenitely. The pause button indicator will

illuminate fully when the player is in static pause mode.

stop: Stops play and resets the player to its start

condition. Pressing and holding stop will clear

any programmed play order, or, if no play

order is programmed, return the player display

to its defaults.

play: Plays a disc from track one unless another

track has been selected. Pressing play while a

track is playing will re-start the track.

16.2 Player Control Modes

CD players have an optional control mode. This provides an

alternative interface in which fast forward and fast reverse

(rather than step forwards and step backwards) can be

selected by pressing and holding the CD player next and

prev buttons respectively. The alternative interface also

provides a pause function on CDX2, CD5 XS and CD5si

players selected by pressing and holding the play button.

To select the optional mode press and hold next while the

player switches on. To select the standard control mode

press and hold prev while the player switches on.

16.3 Player Display and Indicators

The alphanumeric display indicates track and index

numbers, time in minutes and seconds, or system messages.

If a play list is programmed the time displayed reects the

duration of the programme. Depending on the model in

question, some or all of the indicators described below will

be found adjacent to the display:

HDCD: Indicates that an HDCD encoded disc is

playing.

Note: HDCD decoding is not implemented in the CD5si.

repeat: Indicates that repeat has been selected from

the remote handset.

prog: Indicates that a play list has been

programmed.

track: Indicates display of number of tracks or

current track.

pause: Indicates that the player is paused.

stop: Indicates that the player is stopped.

play: Indicates that the player is playing.

time: Indicates display of disc time or track time.

16.4 Output Socket Selection

A pair of RCA Phono output sockets are tted on CD player

rear panels to provide an alternative to the preferred DIN

socket. Proceed as follows to select the RCA Phono sockets.

With the player stopped, press and hold the remote

handset disp function (handset in CD mode) or, if tted,

the player disp button until the CD player prog indicator

ashes. Further operations of the disp function will now

cycle through each combination of the two socket types

(DIN only, RCA Phono only or both). The selected option is

indicated on the CD player display as shown below.

Socket Option Player Display

DIN O

Phono O O

Both O O O

Press and hold the disp function a second time to exit from

socket selection mode.

To avoid compromised sound quality, do not select both

unless their simultaneous use is unavoidable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim CDX Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim CDX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info