Bedienungsanleitung Naim Mu-so 1st Generation (Seite 8 von 23) (Englisch)

707484

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

2. Network Connection

2.1.2: Wi-Fi Setup Using iOS Wireless Accessory

Conguration

Mu-so can take advantage of the Wireless Accessory

Conguration feature incorporated in iOS version 7

or later. Wireless Accessory Conguration enables a

wireless capable product such as Mu-so to be congured

automatically to join the same wireless network as the iOS

mobile device. To use Wireless Accessory Conguration

follow the steps below:

• Ensure that the wireless network that your iOS device

is connected to is the one you wish your Mu-so to use.

• Ensure Mu-so is connected to a mains power supply

and not in standby mode. Ensure no network cable is

connected.

• Using the pin-tool supplied or a straightened paperclip,

briey press the pin-hole button to engage wireless set

up mode. The status indicator will ash purple.

Note: If your Mu-so is previously unused it may start up in

wireless set up mode with the indicator ashing purple.

• Open the wi- settings menu of the iOS device and

scroll down the display. Select the SET UP NEW

AIRPLAY SPEAKER item and follow the steps described.

Diagram 5 illustrates the wi- settings menu.

• The Wireless Accessory Conguration procedure will

now automatically send the network name and security

key that the iOS device is using to your Mu-so and

set up its wi-

conguration.

• The Mu-so status

indicator will

stop ashing and

illuminate white

when the wireless

connection has

been successfully

established.

2.1.3: Wireless Setup Using iOS Wi-Fi Key Sharing

Mu-so can take advantage of the Wi-Fi Key Sharing feature

incorporated in iOS version 6 or later. Wi-Fi Key Sharing

enables a wireless capable product such as Mu-so to

connect via USB to an iOS device and automatically copy

the network name and security key that the device is using.

To use Wi-Fi Key Sharing follow the steps below:

• Ensure that the wireless network that your iOS device

is connected to is the one you wish your Mu-so to use.

• Ensure Mu-so is connected to a mains power supply

and not in standby mode. Ensure no network cable is

connected.

• Connect the iOS device to the Mu-so USB socket. The

iOS device must be switched on and unlocked.

• Using the pin-tool supplied or a straightened paperclip

briey press the pin-hole button. The status indicator

will ash purple.

• A dialogue window will display on the iOS device

screen requesting permission to share Wi-Fi settings.

Select “Allow”. Diagram 6 illustrates the dialogue

window

• After approximately 30 seconds Mu-so will be available

for wireless streaming on your home network. The

Mu-so status indicator will illuminate white.

Diagram 6

Wi-Fi key sharing

Note: Wi-Fi Key

Sharing is only

available with iOS

Version 6 or later.

Diagram 5

Wireless Accessory

Conguration

Note: Wireless

Accessory

Conguration is only

available with iOS

Version 7 or later.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim Mu-so 1st Generation Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim Mu-so 1st Generation

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info