Bedienungsanleitung Naim Mu-so Qb 1st Generation (Seite 21 von 23) (Englisch)

707485

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

6. Installation Notes

6.1 Handling Mu-so

Take great care when lifting, carrying and inverting

Mu-so to access the mains power, network and digital audio

sockets.

Do not invert your Mu-so or Mu-so Qb so that weight is

borne by its top surface or touch panel. Damage to the

touch panel or top surface nish may result. Do not stand

Mu-so or Mu-so Qb on either end panel or grilles.

6.2 Cleaning Mu-so

Your Mu-so should not need cleaning beyond dusting.

Do not use wax or solvent based cleaning products. If

necessary, a damp cloth may be used on the external

casework, however it is important that all liquids are kept

away from the touch panel and rotary control.

6.3 Grille Replacement

The standard Mu-so and Mu-so Qb black grilles can be

replaced with a range of coloured grilles available through

your local Naim retailer or at: www.naimaudio.com/mu-so.

• To remove the Mu-so grille grasp both ends of the grille

simultaneously and gently pull the grille away from the

Mu-so body.

To t a Mu-so grille, line-up the grille studs with the

xing holes and gently push the grille home. Ensure

that the grille is in the correct orientation. The grille

curve runs from top left to bottom right.

• To remove the Mu-so Qb grille rst gently peel the top

rear corner of one side grille away from the Mu-so Qb

body. Once the rear edge of one side grille is released,

repeat with the other side. With both sides released the

grille can be gently pulled away from the front.

To t a Mu-so Qb grille rst line-up the front grille

studs and xing holes and gently push the front section

of the grille home. Next similarly t the forward half of

one side grille followed by its rear edge. Repeat with

the other side grille.

Note: Do not touch any of the drive-units while the grilles

are removed.

6.4 Firmware Update

Updated Mu-so and Mu-so Qb rmware may be released

from time to time. Updated rmware may introduce new

features or modify existing behaviour or performance. The

Naim App incorporates a rmware update routine in its

Settings menu.

Note: The Naim App rmware update routine can also be

used to check that the currently installed rmware is up

to date.

Note: The Mu-so setup web page also includes a rmware

update link. This should be used only on the advice of

Naim support sta.

6.5 Lightning Precautions

Mu-so and Mu-so Qb can be damaged by lightning and

should be turned o and disconnected from the mains and

any wired connection when there is risk of lightning.

6.6 Defaults

To return your Mu-so or Mu-so Qb to its default settings

use the pin-tool supplied (or a straightened paperclip) to

press and hold the pin-hole button adjacent to the status

indicator (see Diagrams 2 and 3 respectively for Mu-so and

Mu-so Qb). Hold the button pressed for six seconds. Mu-so

or Mu-so Qb will return to its default settings and restart.

The rotary control and logo illumination will ash while the

factory default procedure is underway.

6.7 Problems?

Consumer protection varies from country to country. In

most territories a retailer must be prepared to take back any

equipment sold if it cannot be made to work satisfactorily.

A problem may be due to a fault in the product or its

installation. Please contact your local distributor, or Naim

Audio directly, if any diculties cannot be resolved. Contact

Naim Audio directly for help and advice if necessary.

6.8 Service and Contact

It is essential that repairs are only carried out by an

authorised Naim retailer or at the Naim Audio factory. Direct

contact to Naim for service or update information should be

made initially through Customer Services:

info@naimaudio.com

For help with Mu-so or Mu-so Qb installation and operation

please visit: www.naimaudio.com/mu-so-support

For email support contact:

mu-sosupport@naimaudio.com

For telephone support call:

+44 (0)333 321 9923 (UK)

+1 800 961 5681 (USA and Canada)

Please quote the product serial number (found on its

underside panel) in all correspondence.

Important: Never switch o your Mu-so or Mu-so Qb or

disconnect it from the mains supply or network while a

rmware update procedure is underway.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim Mu-so Qb 1st Generation Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim Mu-so Qb 1st Generation

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info