651519
11
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
9
3. Bluetooth Connection
In addition to playing streamed audio via a local network,
Mu-so and Mu-so Qb can play audio over a Bluetooth
wireless connection from appropriately equipped playback
devices.
Mu-so is congured by default with an “open” Bluetooth
connection so does not require “pairing” with a specic
playback device. To connect to a Bluetooth playback device
open the playback device Bluetooth setup page and select
Mu-so BT XXXX or Mu-so Qb BT XXXX in the list of available
devices. After a short delay Mu-so will be available to the
audio apps on the device for playback selection.
Note: Bluetooth wireless connections have a relatively
limited range. A maximum of around 10 metres is typical
in domestic environments, however physical obstructions
in the transmission path may result in reduced range.
Note: The default Mu-so network and Bluetooth name
incorporates the last four characters of the unique MAC
address printed on a label on the underside of each unit
adjacent to the mains input socket.
Bluetooth connection can be switched to a secure format
via the Settings menu of the Naim App. A secure Bluetooth
connection means that connected devices need to be
specically “paired” in order to stream audio. To switch to
secure Bluetooth connection follow the steps below:
Open the Naim App settings menu and select Input
Settings > Bluetooth Security. Select Bluetooth
Security “on.
Touch and hold the Mu-so touch panel input icon until
the Bluetooth icon begins to blink.
Open your Bluetooth playback device Bluetooth
settings page and select “Mu-so-XXXX.
Your Mu-so and playback device will now be securely
paired. No other Bluetooth device will be able to connect to
Mu-so unless it is similarly paired.
Note: If multiple devices are paired, Mu-so will play from
the rst device from which it receives a stream. If you
wish to stream from a dierent paired device, the rst
device must be disconnected.
Note: Up to eight Bluetooth devices can be paired with
Diagram 9
Bluetooth setup
Mu-so simultaneously. If a ninth device is paired the oldest
paired device will be deleted.
Note: Mu-so can be forced to disconnect and delete a
paired Bluetooth device via the Naim App settings menus.
Diagram 9 illustrates Mu-so Bluetooth setup on an Android
mobile device. Bluetooth setup on an iOS device is similar.
The following Section 3 paragraphs are equally
applicable to both Mu-so and Mu-so Qb.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

naim-mu-so-qb

Suche zurücksetzen

  • Muso Q verbindet sich nicht mit i-Phone über w-wlan Eingereicht am 17-12-2022 18:59

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Naim Mu-so Qb wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Naim Mu-so Qb

Naim Mu-so Qb Bedienungsanleitung - Deutsch - 24 seiten

Naim Mu-so Qb Bedienungsanleitung - Holländisch - 24 seiten

Naim Mu-so Qb Bedienungsanleitung - Französisch - 24 seiten

Naim Mu-so Qb Bedienungsanleitung - Italienisch - 24 seiten

Naim Mu-so Qb Bedienungsanleitung - Spanisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info