Bedienungsanleitung Naim NAC S1 (Seite 4 von 20) (Englisch)

707518

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

The manual covers both the NAC S1 preamplifier and NAP S1 power amplifiers. It describes

their use both when connected together using the CAN bus system and when used independently.

CAN bus integrates preamplifier and power amplifier control so that they behave as an

integrated unit.

Your Statement amplifiers will have been initially installed by your Nim retailer who will have

unpacked, positioned, levelled and connected the units appropriately. While this manual covers

positioning, levelling, mains power, input and output connection, setup, operation and care,

it does not include information or guidance on unpacking, packing or shipping. Should you require

in the future to repack or ship your Statement amplifiers without the assistance of a Nim retailer

the necessary information can be found in the Statement Installation Manual. The Installation

Manual is shipped with Statement amplifiers but can also can be found at:

www.nimaudio.com/support.

The manual begins in Section 1 with information on NAC S1 and NAP S1 positioning, levelling and

mains power connection. NAC S1 connections are described in Section 2 and NAP S1 connections

Section 3. The manual continues with setup, operation and care in subsequent sections. Please also

read the Safety Warnings contained within the Installation Manual.

The NAC S1 preamplifier (or CAN bus integrated preamplifier and power amplifier) can be

controlled through either its top panel buttons and volume control or via the supplied Statement

remote handset. Please do not switch-on your Statement preamplifier or power amplifiers until

all connections have been made and until you have read this manual.

Statement amplifiers are supplied with an accessory pack containing this manual and the

following items:

• The Statement Story

* The NAC S1 /NAP S1 Installation Manual

• The Statement Remote Control Handset and 4 x AAA batteries (NAC S1 only)

• Floor protectors

(quantity appropriate for preamplifier only or preamplifier and power amplifiers)

• Floor spike adjustment tommy-bar

• Spirit-level

• Remote Control Handset battery cover allen key

• Speaker terminal wrench

Welcome to Statement, and many congratulations on your investment in music. The Statement

NAC S1 preamplifier and Statement NAP S1 mono power amplifiers are an expression of all we

know about audio amplification. Every lesson learned and technology developed over four decades

of Nim amplification has its place in the NAC S1 and NAP S1. They are also however about new

ideas and technologies and without doubt constitute the most technologically advanced analogue

audio amplification the world has ever seen, or heard.

As befits their fundamentally simple purpose, the Statement amplifiers are relatively simple

products to install and to use. They do however require some thought and care on setup, and

getting the absolute best from them will be far more likely if you are familiar with the contents

of this manual.

WELCOME

6 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim NAC S1 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim NAC S1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info