Bedienungsanleitung Naim NaimUniti 2 (Seite 15 von 25) (Englisch)

707486

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

NaimUniti 2 Setup

type of security feature is known as ‘MAC address filtering’.

The NaimUniti 2 MAC address is shown in the ‘Factory

settings > System Status’ page.

Note: The wireless passphrase/access key is created when

the wireless router is first set up and could be a word or a

series of numbers and letters. If the passphrase/access key

is not known, check on the router settings page or with the

person who initially set up the router.

Note: If a router offers multiple security configurations,

NaimUniti 2 will automatically offer only the most secure

one.

Note: If WEP security is used the router should be set to

“auto” or “open” authentication.

If the selected network is insecure

and requires no passphrase or

access key to join, NaimUniti 2 will

display an alert message. Pressing

the handset ok/list key will

immediately connect NaimUniti

2 to the network and display a

confirmation screen.

Note: Wireless connection difficulties can sometimes be

resolved by changing the wireless connection channel in

the router settings.

4.6.2 Non-DHCP (Static) Network

Connection

If DHCP is de-selected in the

Network Settings menu, five

further parameters will be

displayed.

Parameter Options

IP: User definable (numerical entry)

Default: 0.0.0.0

Mask: User definable (numerical entry)

Default: 0.0.0.0

Gateway (Gtwy): User definable (numerical entry)

Default: 0.0.0.0

DNS1: User definable (numerical entry)

Default: 0.0.0.0

DNS2: User definable (numerical entry)

Default: 0.0.0.0

These settings enable NaimUniti 2 to connect to a network

using a fixed IP address. On selecting each one in turn,

numerical entry screens will be displayed that require

completion with the appropriate network IP address

settings. Consult your network router’s user documentation

for help with specifying fixed IP address settings.

4.7 The Front Display Menu

The Front Display setup menu

enables the behaviour of the

NaimUniti 2 front panel display

to be modified. The options are

tabulated and described in the following section:

Parameter Options

Off During Mute: Yes / No

Auto Off: Select time from list

Clock When Off: Yes / No

Logo Off: If Muted / If Display Off / Always / Never

When Off During Mute is selected the front panel display

will switch off when mute is engaged. Auto Off defines the

length of time the display will remain switched on after

the last interface operation is carried out. Time periods of

between 10 seconds and 1 hour can be selected.

Note: If the display has been switched off using the

handset disp key this setting will take priority over the Auto

Off setting. The display will always switch on briefly when

control commands are received.

The Clock When Off settings enables the clock to remain

displayed when other display settings are switched off.

Note: If Clock When Off is set to “Yes” and Logo Off is set

to “If Muted”, the clock display will dim automatically 10

seconds after mute is selected.

The Logo Off settings select the circumstances in which the

front panel logo illumination will switch off.

4.8 The Clock and Alarm Menu

The Clock & Alarm setup menu

enables the NaimUniti 2 clock

to be set and alarms to be

configured.

Selecting Set Weekday Alarm

or Set Weekend Alarm opens a

menu that offers the following parameters and options:

Parameter Options

Enabled: Yes / No.

Selecting Yes

primes the

alarm. Selecting

No disables the

alarm.

Alarm Time: 07:00. Selecting the time opens a screen

that enables the alarm time to be set by

using the remote navigation (563 

4) and numeric keys.

Input: NaimUniti 2 external inputs or radio presets

can be selected to become the alarm

audio source.

Note: The NaimUniti 2 radio can only be used as an alarm

signal using stored radio presets.

Volume: 30. The alarm audio volume can be set

independently of the default NaimUniti 2

volume using the remote handset up

(5) and down (6) keys.

Weekday alarms operate on Mondays to Fridays. Weekend

alarms operate on Saturdays and Sundays.

Front Display 1/4

4Off During Mute: No

Auto Off: 2 mins

Clock When Off: Yes

Logo Off: If Muted

Network Settings 1/5

4IP: 192.168.0.80

Mask: 255.255.255.0

Gtwy: 192.168.0.1



DNS1: 192.168.0.1

This wireless network is

insecure and requires no

passphrase or access key.

Press OK To Connect

Clock & Alarm 1/5

4Set Weekday Alarm

 Set Weekend Alarm

Adjust Time Zone

Resync Time From Net

Weekday Alarm 1/4

4Enabled: No



Alarm Time: 07:00

Input: Fluid Radio

Volume: 30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim NaimUniti 2 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim NaimUniti 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info