Bedienungsanleitung Naim NaimUniti 2 (Seite 7 von 36) (Englisch)

707486

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

2. Installing and Connecting

2.3 Speaker Outputs

A set of stereo speaker connection sockets is provided

on your Uniti Series product rear panel. Custom Naim

Audio loudspeaker connectors are supplied to make the

connection, and in order to comply with current European

safety regulations these should always be used. Naim Audio

speaker cable will provide the best results, however, a range

of speaker cable types may be used without risk. Contact

your local Naim retailer for further advice. Use equal lengths

of speaker cable for each channel.

Ensure when connecting speakers that they are “in phase”.

That is, the positive and negative connection orientation at

both the speaker and amplier ends of the cable is the same

for both channels.

2.4 Headphone Output

Uniti Series products are tted on their front panels with a

stereo headphone socket. Insertion of a headphone plug will

mute the speaker outputs.

Note: Uniti Series products control and store volume

settings separately for headphones and speakers.

2.5 DAB/FM Aerial Connection

The Uniti Series DAB/FM tuner module requires a strong,

interference-free signal to enable high quality FM and

DAB reproduction. The rear panel DAB/FM Aerial socket

should be connected, via 75 ohm low-loss coaxial cable, to a

suitable aerial. The aerial should be mounted clear of large

obstructions and as high as possible; ideally on a roof.

Note: Your local retailer should be able to oer advice on

a suitable aerial and aerial installer.

2.6 Signal Ground Switch

Your Uniti Series product is tted on its rear panel with a

Signal Ground switch oering two positions: Chassis or

Floating. Select the Chassis position unless your Uniti Series

product is connected in a hi- system incorporating another

earthed source component, or mains “hum” is audible

through the loudspeakers. Contact your retailer, distributor

or Naim for advice if necessary.

Note: “Connected” in the context above means an

analogue audio signal cable that includes an earth

connection.

Note: All Naim CD players are earthed so the Signal

Ground switch should be set to oating if one is

connected in the system.

No damage will be done if the wrong Signal Ground position

is chosen, however the system sound quality may be

compromised.

Note: Uniti Series analogue input and output negative

connections for each channel are common. The mains

earth (ground) should always be connected regardless of

what other equipment is used. The mains earth primarily

grounds the case and the electrostatic screen within the

transformer, and is only connected to the signal negative

if the Signal Ground switch is set to Chassis. In order to

avoid hum loops, the signal negative of the whole system

should be connected to the mains earth in one place only.

2.7 USB Interface

Uniti Series products are tted with a front panel USB

interface intended for the connection of USB memory sticks

carrying audio les. The USB interface should not be used

for any other purpose.

Note: Most UMS (Universal Mass Storage) USB memory

sticks are compatible with the Uniti Series USB audio

interfaces. Other UMS devices might include portable

digital music players, smart-phones, tablet computers

and memory card readers. Non-UMS USB devices, such

as older MP3 players, may be connected to a Uniti Series

product analogue audio input from their headphone

sockets. See Section 8 for more information.

2.8 Network Connections

2.8.1 Wired Network Connection

Uniti Series products are tted on their rear panels with a

standard RJ45 Ethernet socket. This socket enables them to

join home networks via a network router to access internet

radio streams, to play audio les stored on UPnP™ servers,

to play Spotify

Connect and TIDAL streams, and to play

from or broadcast to other Naim streamers on the same

network.

Note: Ethernet-over-mains hardware may be used and

provides a simple and convenient method of wired home

network connection. However, depending on mains wiring

factors specic to each home environment, the presence

of network data on the mains supply may compromise

overall system sound quality. If any sound quality

compromise is found to be unacceptable, dedicated

network cabling should be installed as the preferred

option, or alternatively wireless networking can be

employed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim NaimUniti 2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim NaimUniti 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info