707511
12
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
3.4 NAP S1 CONTROL CONNECTIONS
The NAP S1 provides a variety of interface connection sockets that enable both its control
integration with the NAC S1 preamplifier and its integration with wider audio system automation,
remote control schemes and home automation technology. Diagram 3.2 illustrates the NAP S1
connection panel. The connection panel interface sockets comprise the following:
CAN BUS. Two RJ45 CAN bus sockets are provided to enable control integration of the NAP S1 with
the NAC S1 preamplifier and potentially with other CAN bus equipped audio equipment.
If your NAP S1 power amplifiers are to be used with a NAC S1 preamplifier, connect the CAN bus
cables as follows:
Connect the right-hand NAC S1 CAN bus socket to the left channel NAP S1.
Connect the left-hand NAC S1 CAN bus socket to the right channel NAP S1.
The left hand NAP S1 CAN bus sockets should be used.
The right hand NAP S1 CAN bus socket can be used for control integration with other CAN bus
equipped equipment. Your Nim retailer will be able to advise on both CAN bus control integration.
A 560mm CAN bus cable is supplied with each NAP S1 power amplifier. Your Nim retailer will be
able to supply longer cables if required.
12V TRIGGER. The NAP S1 is equipped with a 3.5mm jack socket 12V trigger input and a trigger
output that enable control integration with appropriately equipped preamplifiers.
If your NAP S1 power amplifiers are to be used with a preamplifier equipped with a 12V trigger
output, connect the 12V trigger cables as follows:
Connect the left channel NAP S1 trigger input to the preamplifier
trigger output.
Connect the right channel NAP S1 trigger input to the left channel NAP S1 trigger output.
NOTE. CAN bus should be used in preference to 12V trigger control for integration of the NAC S1
and NAP S1.
Your Nim retailer will be able advise on 12V trigger control and to supply control cables of the
appropriate length.
MINI USB. A mini-USB socket is fitted to the NAP S1 to facilitate firmware updates. Your Nim
retailer will be able to advise on firmware updates and procedures.
3.0 NAP S1 POWER AMPLIFIERS
22 23
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Naim NAP S1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Naim NAP S1

Naim NAP S1 Bedienungsanleitung - Deutsch - 38 seiten

Naim NAP S1 Bedienungsanleitung - Französisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info