Bedienungsanleitung Naim NDS (Seite 7 von 23) (Englisch)

707491

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Installation and Connection

2.8 USB Audio Interface

The NDS is fitted with a front panel USB interface intended

for the connection of USB memory hardware carrying

audio files. The USB interface should not be used for any

other purpose.

Most UMS (Universal Mass Storage) USB devices are

compatible with the NDS USB audio input. Such devices

might include portable digital music players, smart-phones,

tablet computers, USB memory sticks and memory card

readers.

2.9 Network Connections

The NDS can be connected to a TCP/IP network via either

a wired or wireless connection. Network connection

enables the NDS to play internet radio data streams or

play audio files stored on UPnP™ servers such as the

Naim UnitiServe and HDX, and appropriately configured

computers and network drives.

2.9.1 Wired Network Connection

The NDS is fitted on its rear panel with a standard Ethernet

socket. For wired network connection this socket should

be connected to a spare Ethernet socket on your network

router.

Note: Ethernet-over-mains hardware may be used and

provides a simple and convenient method of wired home

network connection. However, depending on mains wiring

factors specific to each home environment, the presence

of network data on the mains supply may compromise

overall system sound quality. If any sound quality

compromise is found to be unacceptable, dedicated

network cabling should be installed or wireless networking

should be employed.

2.9.2 Wireless Network Connection

If NDS is to connect wirelessly to the home network the

supplied Wi-Fi antenna must be fitted to the rear panel

wireless antenna socket. Wireless configuration will also be

necessary before NDS is able to connect to your home

network. See Section 4.5.1.

2.9.3 Network Settings

The NDS is set up when originally shipped not to require

any on-site TCP/IP configuration but to connect to

a network automatically (it uses DHCP by default).

However, if your NDS has been previously used, its network

configuration may have been altered leaving it unable

to connect automatically. If this appears to be the case

ensure that DHCP is selected in the Network Settings

menu (see Section 4.5 of this manual) and re-start NDS. If

problems still persist contact your retailer, installer or Naim

Audio directly.

Note: Before reporting network connection problems carry

out a Factory Reset operation. Select Reset All Settings

from the Factory Settings setup menu. See Section 4.10.

Note: An NDS switched on without a working wired network

connection will only be able to connect to a home

network wirelessly. To use an Ethernet (wired) connection,

switch the NDS off, connect the network and switch it on

again.

Note: For internet radio to operate, the NDS requires

connection to a high speed internet service.

2.10 System Automation

NDS control can be linked using System Automation to

the control of some Naim preamplifiers, CD players and

the Naim DAC. System Automation enables for example,

preamplifier inputs to be selected via the NDS, or for

n-Stream transport functions to control a CD player. To take

advantage of System Automation, connect one of the

NDS rear panel Remote Out sockets to a preamplifier, CD

player or DAC Remote In socket. Use a cable terminated

with a 3.5mm jack plug at one end and a 3.5mm jack or

phono plug as necessary at the other end.

Using both NDS Remote Out sockets, for example, one

connected to a preamplifier and one connected to a

CD player, enables comprehensive system control via the

n-Stream app.

Note: Stereo and mono 3.5mm jack to 3.5mm jack can

be used for System Automation. If a stereo 3.5mm jack to

phono plug cable is used, connect the left channel phono

plug.

Note: NDS System Automation is switched off by default. A

full description of its configuration and use can be found in

Section 4.9.

2.11 External Control and Update Sockets

The NDS is fitted with a 3.5mm jack Remote In socket on

its rear panel. The Remote In socket can be used for RC5

remote control via a fully wired connection or a remote IR

repeater.

The NDS is also fitted with a rear panel mini-USB socket. This

socket enables firmware upgrades and diagnostic tests to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim NDS Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim NDS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info