Bedienungsanleitung Naim NDS (Seite 15 von 23) (Englisch)

707491

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Setup

4.3.2 UPnP™ (Network) Input

Parameter Options

Enabled: Yes / No

Name: User definable

Server History: Yes / No. If Yes

is specified

NDS will remember the last used folder

if the UPnP™ server is still available. If No

is specified NDS will display the full list of

available servers.

4.3.3 USB Input

Parameter Options

Enabled: Yes / No

Name: User definable

Folder History: Yes / No. If Yes

is specified NDS

will automatically display the last used

folder on the USB device. If No is specified

the top level folder of the device will be

displayed.

4.3.4 Digital Inputs 1, 2 and 3

Parameter Options

Enabled: Yes / No

Name: User definable

Unstable source: Yes / No

Select No unless

the NDS has problems locking to a digital

signal. Selecting Yes will enable the NDS

to lock to unstable digital signals, however

sound quality will be slightly degraded.

4.4 The Analogue Outputs Menu

The Analogue Outputs menu

enables the main DIN or RCA

phono outputs to be disabled

or individually or simultaneously

selected.

Parameter Options

Main out: Disabled / DIN / Phono / DIN-Phono.

Select the appropriate option for your

installation. Only select the DIN-Phono

option if both outputs are simultaneously

required.

4.5 The Network Settings Menu

The Network Settings menu

enables NDS network parameters

to be customised to suit the

router and network. The options

are tabulated and described in

the following sections:

Parameter Options

Name: User definable (text entry)

Default: NDS-xxxx

Wireless: Not Used / Wireless Network Names

Status: Connected / Not Connected / No Signal

/ Login Failure / Busy / Etc.

DHCP: Yes / No

MAC: Displays the NDS MAC address

The Name parameter enables the NDS’s default network

name to be changed.

The Wireless parameter enables a wireless network to be

chosen and joined. See Section 4.5.1 below for detailed

wireless set up notes.

Network Status displays the current network connection

status.

The DHCP parameter enables the NDS network settings to

be modified. In most cases, specifying Yes and leaving

NDS set to DHCP, will be the appropriate option. See

Section 4.5.2 for notes on static address (non-DHCP)

network connection.

Note: Devices installed on a network have an IP address

through which they are identified by all the other items

on the network. DHCP is a set of rules that enable the

automatic allocation of addresses as items are connected

(or switched on while connected) to the network. NDS is

set up by default to use DHCP.

Note: If NDS is connected to the network both wirelessly

and via Ethernet (wired), the Ethernet connection will take

priority.

UPnP 1/3

4Enabled: Yes

Name: UPnP

Server History Yes

USB 1/3

4Enabled: Yes

Name: USB

Folder History: No

Digital 1 1/3

4Enabled: Yes

Name: Dig 1

Unstable source: No

Analogue Outputs 1/1

4Main Out: DIN

Network Settings 1/5

4Name: NDS-xxxx

Wireless: Not Used

Status: Not Connected

DHCP Yes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim NDS Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim NDS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info