Bedienungsanleitung Naples internet radio Internet radio (Seite 13 von 71) (Holländisch)

802455

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Network

• Network Options

Always on: The WLAN function remains switched on (faster access when switching from other modes of radio).

Auto off in 30s: The WLAN function shuts down after 30 seconds when not in use (to save energy).

• Wi-Fi Channels

Not all of the Wi-Fi channels are available in every country. There may be variation between different countries.

Therefore, it is necessary to choose the Wi-Fi channels to ensure the Wi- Fi performs satisfactorily.

The channels are already set according to the requirement in different countries. Choose the country you are staying

in from the list to get the correct channel.

• Add / Remove AP

Add AP (scan) - It will scan out a list of routers around.

Add AP (WPS button) - Choose this option to connect your Wi-Fi router via WPS (if the router has a WPS button).

Remove AP - If you have already added a router and want to remove it, choose this option.

Note: It is recommended to place the radio within 2 meters from the router for better success rate.

• AP

If you have added more than one router to the radio and want to switch to another one, select this option to change.

• Signal

This is to show the strength of the Wi-Fi signal as received by the radio. Usually signal levels lower than -70dBm is

classed as weaker level and if it affects the reception of your radio, you may need to optimize the router location or

check if there is any problem with the router itself.

• IP

The IP is set to Dynamic by default. Select to change Fixed IP according to your network condition.

• DNS

The DNS is set to Dynamic by default. Select to change <Fixed> DNS according to your network condition.

Date and Time

The radio will set your local time automatically after the internet connection is completed. If you want to do manual setting,

change it by the following options:

• Time zone

Auto-set Time Zone: This option is set by default.

Manual-set Time Zone: Choose this option if you want to set the time in another region.

Choose and highlight the region/city you prefer and press OK to confirm.

Coupled with NTP (use network time) and DST (Daylight Saving Time) will be adjusted automatically if you choose to

use network time (NTP).

• Set Time Format

Choose either 12-hour or 24-hour notation you prefer.

• Set Date Format

• DST (Daylight Saving Time)

Enable on/off

• NTP (Use network time)

NTP is designed to synchronize a device's clock with a time server. Your radio will synchronize the time server by

default every time it powers up and connects to Internet.

This ensures a very high degree of accuracy in the radio's clock. You can change to use other time server by inputting

the URL address (see below NTP server). You can choose “Do not use network time” if you don't want it to.

If you choose not to use NTP for clock synchronization, highlight the NTP (Network Time Protocol) and press OK to

make the change. You will see the Set Date & Time appear on the menu. Select it and adjust the date and time as you

desire.

• NTP Server

NTP is designed to synchronize a device's clock with a time server. Here it shows the server being used for the radio.

Language

The default language is set to English. You can choose other languages as preferred. Scroll with the [▲/▼] buttons on remote

or the [Tune/OK] knob to the symbol and press [OK]. Scroll to highlight and press [OK] to select your language of choice.

English, French, Spanish, Italian, German, Dutch, Polish, Russian and Simplified Chinese are available.

DAB set up

• DAB full scan

You can always carry out a new scanning of DAB channels by selecting this option. All current presets and channels

will be erased.

• DAB station list

The scanned DAB stations will be listed here for management. You can move the position of- or delete any station.

Scroll to the station and press [►]. A pop-up window will be presented: Move up, Move down and Delete.

FM set up

• FM area

Choose the Region according to your physical location to define the search range for the radio.

• Scan setting

Either "All stations" or "strong stations" (with stronger signal) can be selected for the scan.

• Audio setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naples internet radio Internet radio Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info