Bedienungsanleitung Napoleon BILEX 485 (Seite 5 von 52) (Deutsch, Englisch)

637911

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

www.napoleongrills.com

Technical Data

The following table lists input values for the appliance.

Burner Orice Size (Gross) Heat Input (Total) Gas Usage (Total)

MAIN 58 (1.07mm) 14.4 kW 1047 g/h

BACK 64 (0.91mm) 4.0 kW 291 g/h

Cered Gases / Pressures - Check rang plate to ensure that it corresponds with following list.

Do not tamper with or modify regulator. Use only regulators, which supply the pressure, listed in the table

above. A regulator of 28-30mbar must be used for butane or a 37mbar regulator for propane. For grills

set up to operate at 50mbar, the grill is equipped with an internal regulator. This internal regulator has an

outlet pressure of 30mbar and must not be modied or adjusted. For replacement, use only the regulator

specied by the manufacturer: Maxitrol model number RV47LSMF.

This unit includes an internal regulator which stabilizes the gas pressure and improves grill performance.

This regulator cannot be adjusted. There is a pressure tap located on the side of the regulator. It can

be used by a qualied service person when servicing the grill to determine if the regulator is funconing

properly. The screw within the pressure tap must always be kept ght, except when performing a pressure

test on the regulator (qualied service personnel only).

Gas Category

3B/P(30)

3+(28-30/37)

3B/P(50)

Orice Sizes (see above) I I I

Gases / Pressures Butane 30mbar

Propane 30mbar

Butane 28-30mbar

Propane 37mbar

Butane 50mbar

Propane 50mbar

Countries DK, FI, NL, NO,

BE, ES, FR, GB, IE,

IT, PT

DE, AT

Gas Hook-Up Instrucons

WARNING! This grill is designed for non-combusble enclosures only, and must be installed and

serviced by a qualied installer to local codes.

WARNING! Cabinet frame, cabinet, and counter top must be made from non-combusble material.

WARNING! The pressure supplied to the grill must conform to what is listed on the rang plate of

the grill. If the supply pressure is greater, a regulator must be installed.

BUILT IN PROPANE GAS HOOK-UP: The piping up to the gas grill is the responsibility of the installer and

piping should be located as shown in the built-in instrucons. A exible metal connector is included to

simplify the installaon of the unit. Connect this exible metal connector to the are ng on the end of

the manifold. Connect the other end of the connector to the gas piping. Ensure that the connector does

not pass through a wall, oor, ceiling or paron, and is protected from damage. Do not use a hose to

connect the unit except to connect the cylinder regulator to the piping system. It must be connected with

rigid pipe, copper tube or an approved exible metal connector which complies with naonal and regional

codes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Napoleon BILEX 485 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Napoleon BILEX 485

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info