Bedienungsanleitung Napoleon BIP 500RB (Seite 4 von 60) (Englisch, Französisch)

637930

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

www.napoleongrills.com

General Informaon

This Gas Barbecue Is Cered Under Canadian And American Naonal Standards, CSA 1.6a-2012 and ANSI

Z21.58a-2012 respecvely for Outdoor Gas Grills and should be installed to conform with local codes. In

absence of local codes, install to the current CAN B149.1 Natural Gas and Propane Installaon Code in

Canada or to the Naonal Fuel Gas Code, ANSI Z223.1 in the United States.

If a rosserie motor is used, it must be electrically grounded in accordance with local codes or, in absence

of local codes, with the current CSA C22.1 Canadian Electrical Code in Canada or the Naonal Electrical

Code, ANSI/NFPA 70 in the United States.

CALIFORNIA PROPOSItION 65: The burning of gas fuel creates by-products, some of which are on the

list as substances known by the State of California to cause cancer or reproducve harm. When cooking

with gas, always ensure adequate venlaon to the unit, to minimize exposure to such substances.

Propane Cylinder Specicaons

WARNING! If these instrucons are not followed exactly, a re causing death or serious injury

may occur.

WARNING! Do not store a spare propane cylinder on the shelf beneath the barbecue.

If the gas grill is being supplied with propane from a portable cylinder, a regulator specied by the

manufacturer must be used. The regulator must supply a pressure of 11 inches water column (0.39 PSI) to

the gas grill and have a QCC1 type ng. Cylinders to be used with this unit must be supplied with a QCC1

cylinder valve. A QCC1 cylinder has a posive seang connecon, which will not allow gas ow unl a

posive seal has been achieved. It is also equipped with an excess ow device. In order to aain full ow

to the grill, the valves must be in the o posion when the cylinder valve is turned on.

A dented or rusty cylinder may be hazardous and should be checked by your propane supplier. Never

use a cylinder with a damaged valve. Use only a propane supply cylinder constructed and marked in

accordance with the specicaons for LP-gas cylinders of the Naonal Standard of Canada, CAN/CSA-b339,

Cylinders, Spheres and Tubes for Transportaon of Dangerous Goods; and Commission, as applicable or

the Specicaons for LP-Gas Cylinders of the U.S. Department of Transportaon (D.O.T.). Cart models have

been designed for use with a 20 lb (9.1 kg) size propane cylinder only (not supplied).

The propane cylinder must be provided with a cylinder connecon device compable with the connecon

for outdoor cooking appliances. The propane cylinder must be provided with a shut-o valve terminang

in a propane cylinder valve type QCC1, and a safety relief device having direct communicaon with the

vapor space of the cylinder. The cylinder supply system must be arranged for vapor withdrawal and the

cylinder shall include a collar to protect the cylinder valve. The cylinder shall incorporate a listed OPD

(overll protecon device). Do not store a spare LP-gas cylinder under or near this appliance. Never ll the

cylinder beyond 80 percent full. If the preceding informaon is not followed exactly, a re causing death

or serious injury may occur.

Gas Hook-Up Instrucons

WARNING! This grill is designed for non-combusble enclosures only, and must be installed and

serviced by a qualied installer to local codes.

WARNING! Cabinet frame, cabinet, and counter top must be made from non-combusble

material.

WARNING! As indicated on the rang plate, this gas grill is designed to operate with gas supply

pressures of 11” WC for Propane and 7” WC for Natural Gas. For installaons where the gas supply

pressure exceeds these requirements, a regulator must be installed upstream of the grill’s components.

If the gas supply pressure is lower than these requirements, the unit will be under-red and will not

reach the maximum temperatures. Ensure that the supply line size complies with local and/or naonal

installaon codes.

BUILT IN PROPANE GAS HOOK-UP: The piping up to the gas grill is the responsibility of the installer and

piping should be located as shown in the built-in instrucons. A exible metal connector is included to

simplify the installaon of the unit. Connect this exible metal connector to the are ng on the end of

the manifold. Connect the other end of the connector to the gas piping. Ensure that the connector does

not pass through a wall, oor, ceiling or paron, and is protected from damage. Do not use a hose to

connect the unit except to connect the cylinder regulator to the piping system. It must be connected with

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Napoleon BIP 500RB Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info