Bedienungsanleitung Native Straylight (Seite 21 von 63) (Englisch)

707120

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

(3) Grain Waveform display: Displays the source sample's waveform and visualizes the Cursor

position for up to ten notes simultaneously. You can adjust the Cursor Range by clicking and drag-

ging the left and right boundaries in the waveform. For more information about the Cursor Range,

refer to Range. In Scan Sync mode, the display additionally shows the sync anchor (4).

You can import your own sample by dropping your sound onto the waveform. Kontakt will try to

detect the root key automatically when the sample is loaded. You can also set the root key of the

imported sample manually using the up/down arrows of the Grain User Sample Root Key in the

top right corner of the Waveform display. They allow you to increase or decrease the root key of

the imported user sample by one octave. Hold down the option key to change the key in semi-

tones. For more information on adding samples, refer to Importing Your Own Samples [8].

(4) Sync Anchor: Sets the Cursor's synchronization point in Scan Sync mode. In this mode, the

Scan control in the CURSOR section adjusts the time it takes the Cursor to move from the Start

position to the sync anchor. Note that the Sync Anchor can be positioned outside of the cursor

range. For more information, refer to Cursor.

(5) GRAINS: Contains controls related to the basic generation of the individual grains and their

shape. For more information, refer to Grains.

(6) CURSOR: Contains controls related to the Cursor and how it moves through the source sam-

ple. The Cursor represents the read-out position of the grains. For more information, refer to Cur-

sor.

(7) RANGE: Contains controls related to the Cursor Range, which sets boundaries for the read-out

position of the grain in the source sample. For more information, refer to Range.

(8) TUNING: Contains controls related to the pitch of the individual grains. For more information,

refer to Tuning.

(9) AMP: Contains controls related to the volume level of the individual grains. For more informa-

tion, refer to Amp.

(10) ENVELOPE: Contains controls related to the Grain layer's volume envelope. For more infor-

mation, refer to Envelope.

6.2. Grains

This section contains controls related to the basic generation of the individual grains and their

shape. This way you can define the basic character of your sound. Interval and Size are funda-

mental to the way the sound transforms the source sample. High Interval values can be used for

more consistent and slowly evolving sounds, while low values can create lively or erratic results

that change at a high rate. Use high values for Size to allow more of the character of the source

sample to shine through the sound, or dive fully into abstract micro sound with low values. Fade In

and Fade Out can be used to make the sound smoother at high values, or more textured and an-

gular at low values.

Grain Page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Native Straylight Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info