Bedienungsanleitung Native Straylight (Seite 51 von 63) (Englisch)

707120

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

• Input: Controls the input gain to the effect.

• Attack: Adjusts the time the Compressor will take to reach the full Ratio value after an input

signal exceeds the Threshold level.

• Sustain: Controls the scaling of the sustain portion of the input signal’s volume envelope. In-

creasing this parameter will add more body to the sound and decreasing it will reduce the

sound’s tail.

• Release: Adjusts the time the compressor will take to fall back to non-compression after the

input signal falls below the threshold.

• Output: Controls the module’s output level.

Bus Comp Effect Modes

Compressors are dynamic tools which automatically reduce the level of loud passages in a signal,

thereby affecting the signal’s dynamic range. The Solid Bus Comp is modeled after a classic ana-

log bus compressor. It offers a more characteristic dynamic control than KONTAKT’s standard

compressor.

Feedback Comp Fast Effect Modes

Compressors are dynamic tools that automatically reduce the level of loud passages in a signal,

thereby affecting the signal's dynamic range. A feedback compressor is a type of compressor that

compares the amplifier's output signal, rather than the input signal, to a threshold level. When the

threshold level is reached, the compressor reduces the signal's gain level. The Feedback Com-

pressor is modeled after a classic feedback compressor known for its bright and punchy sound.

Transient Master

The Transient Master is an easy to use compressor designed to control the attack and sustain of a

sound. Instead of following the amplitude of the sound like a traditional compressor, it follows the

general envelope and is thus not as susceptible to changes of input gain. It is best used on sounds

with fast attacks, like percussion, pianos or guitars. The Transient Master can also be quite ex-

treme in some cases, so use it with caution.

Limiter

Limiters are actually a special form of compressors with a ratio of one to infinity, a threshold just

below the maximum level, and a very short attack time. They act as a “safety net” to keep short

signal peaks from overloading the system, which would result in audio clipping. While compressors

have a range of artistic applications, limiters are usually used for technical reasons — they can

tame signals with peaks which would otherwise overload the output, without requiring you to turn

the signal’s overall volume down.

13.4. EQ

Fully parametric peak equalizers allow for a wide range of tonal alterations and corrections. Use

the EQ to boost or cut selective frequencies of the audio signal. The EQ is mainly a tool to tailor

your audio signal to taste by cutting out selected frequencies or boosting others. The EQ can be

operated in a 1 Band EQ and in a 3 Band EQ which are explained in more detail below.

Effect Reference

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Native Straylight Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info