Bedienungsanleitung Native Straylight (Seite 56 von 63) (Englisch)

707120

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

LP Draft

The Daft filter has been adapted from MASSIVE and is a more aggressive synthesizer filter de-

sign. The response of the filter is a 2-pole low-pass, which attenuates frequencies above the cutoff

at a rate of -12 dB/octave. The daft filter also includes a Gain knob that controls the amplitude in-

crease after the filter. This control can be used to compensate for amplitude reduction due to the

filter, or to increase the soft saturation of the effect.

HP Draft

The Daft filter has been adapted from MASSIVE and is a more aggressive synthesizer filter de-

sign. The response of the filter is a 2-pole high-pass, which attenuates frequencies below the cut-

off at a rate of -12 dB/octave. The Daft filters also include the following controls:

Notch SV4 Pole

The State Variable (SV) filters have a clean characteristic that can be used for all kinds of audio

signals. The Notch 4 is a 4-pole notch filter, which attenuates frequencies at the cutoff.

AR LP 2

The Adaptive Resonance (AR) filters follow the amplitude of the input signal and adjust the reso-

nance accordingly. At higher input levels, the resonance will reduce, and for lower levels it will in-

crease, this avoids unpleasant peaks. These filters work best on full loops or drums. The LP2 is a

2-pole low-pass, which attenuates frequencies above the cutoff at a rate of -12 dB/octave.

AR LP 4

The Adaptive Resonance (AR) filters follow the amplitude of the input signal and adjust the reso-

nance accordingly. At higher input levels, the resonance will reduce, and for lower levels it will in-

crease, this avoids unpleasant peaks. These filters work best on full loops or drums. The LP4 is a

4-pole low-pass, which attenuates frequencies above the cutoff at a rate of -24 dB/octave.

AR HP 2

The Adaptive Resonance (AR) filters follow the amplitude of the input signal and adjust the reso-

nance accordingly. At higher input levels, the resonance will reduce, and for lower levels it will in-

crease, this avoids unpleasant peaks. These filters work best on full loops or drums. The HP2 is a

2-pole high-pass, which attenuates frequencies below the cutoff at a rate of -12 dB/octave.

AR BP 2

The Adaptive Resonance (AR) filters follow the amplitude of the input signal and adjust the reso-

nance accordingly. At higher input levels, the resonance will reduce, and for lower levels it will in-

crease, this avoids unpleasant peaks. These filters work best on full loops or drums. The BP2 is a

2-pole band-pass, which attenuates frequencies below and above the cutoff at a rate of -12 dB/

octave.

HP LP Serial

The State Variable (SV) filters have a clean characteristic that can be used for all kinds of audio

signals. The Ser. LP/HP is the combination of a high-pass filter routed serially after a low-pass fil-

ter. The result is similar to a band-pass filter.

Effect Reference

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Native Straylight Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info