Bedienungsanleitung Nautilus E628 (Seite 40 von 52) (Englisch)

737228

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

To adjust the target watts value during the workout, use the Increase() or Decrease() buttons or the Resistance

Increase or Decrease buttons.

Note: The Resistance Level Quick buttons are disabled during the workout.

CONSTANT POWER (Time or Distance goal)

The CONSTANT POWER program lets the user set a target watts value for a set length of time or distance.

1. After the CONSTANT POWER program is selected, the Console displays SELECT GOAL TYPE.

2. Use the Increase() or Decrease() buttons to select the type of Goal (Time or Distance), and push OK.

3. Use the Increase() or Decrease() buttons to adjust the goal value, and push OK.

The default time is 30 minutes. The default distance is 10.0 miles.

Note: Holding down the button speeds up the selection scrolling of the display.

4. Use the Increase() or Decrease() buttons to adjust the Target Watts value.

 Thedefaultis120w.Themaximumvalueis300w.Theminimumvalueis30w.Thevalueisdisplayedin5wincrements.

Note: Holding down the button speeds up the selection scrolling of the display.

5. Push OK to begin the goal-oriented workout. The WATTS TARGET is displayed at the top of the screen. The GOAL

value will count down as the value for percent completed increases.

To adjust the target watts value during the workout, use the Increase() or Decrease() buttons or the Resistance

Increase or Decrease buttons.

If the watts output does not match the target watts value (+/- 10%), the WATTS TARGETvaluewillash.Ifnecessary,

push the Increase() or Decrease() buttons or Resistance Increase or Decrease buttons to adjust the WATTS

TARGET value.

Changing a Workout Program During a Workout

The Console allows a different Workout Program to be started from an active workout.

1. From an active workout, push PROGRAMS.

2. Push the Increase() or Decrease() buttons to select the desired workout program, and push OK.

3. Push the Increase() or Decrease() buttons to select the Goal type, and push OK.

4. Push the Increase() or Decrease() buttons to set the value for the workout.

5. Push OK to stop the active workout and start the new workout.

ThepreviousworkoutvaluesaresavedtotheUserProle.

Pausing or Stopping

The Console will go into Pause Mode if the user stops pedaling and pushes PAUSE/END during a workout, or there is no

RPM signal for 5 seconds (user not pedaling). The Console will cycle through a series of messages that change every 4

seconds:

- WORKOUT PAUSED

- PEDAL TO CONTINUE (if a bike) / STRIDE TO CONTINUE (if an elliptical)

- PUSH END TO STOP

During a paused workout, you can use the Increase/Decrease buttons to move through the result channels manually.

1. Stop pedaling and push the PAUSE/END button to pause your workout.

2. To continue your workout, push OK or start pedaling.

To stop the workout, push the PAUSE/END button. The Console will go into Results / Cool Down mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nautilus E628 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nautilus E628

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info