Bedienungsanleitung Nautilus T628 (Seite 37 von 56) (Englisch)

691187

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

10. The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings

and / or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option

allows the Telemetry Heart Rate Receiver to be deactivated blocking the interference.

The Display shows the current value setting: “ON” or “OFF”. Push the Increase(c) or Decrease(d) buttons to change

the value. The default is “ON”.

Push the OK button to set the Telemetry Heart Rate Receiver to active.

11. The Console will go to the Power-Up Mode screen with the user selected.

Reset a User Profile

1. From the Power-Up Mode screen, push the User button to select one of the User Pro¿ les.

2. Push the OK button to select the User Profile.

3. The Console display shows the GOAL TRACK prompt. Push the Decrease (d) button to change the prompt.

Note: To e[it the User Pro¿ le options, push the PAUSE/STOP button and the console will go back to the Power-Up

Mode screen.

4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User

Pro¿ le option.

5. The Console will now confirm the request to reset the User profile (the default selection is ‘RESET - NO’). Push the

Increase(c) or Decrease(d) buttons to adjust the selection.

6. Push OK to make your selection.

7. The Console will go to the Power-Up Mode screen.

Changing Incline Levels

Push the Incline Level Increase(c) or Decrease(d) buttons to change the incline angle

of the Deck at any time with the Safety Key installed. To rapidly change the incline level

push the desired Pre-Set Incline Button, and then the Incline Enter Button. The Deck will

adjust to the selected incline level.

Note: After a Pre-Set Incline Button is pushed, the Incline Enter Button must be

pushed within 12 seconds.

%HVXUHWKHDUHDEHORZWKHPDFKLQHLVFOHDUEHIRUHORZHULQJWKH'HFN)XOO\

lower the Deck after each workout.

([HUFLVHRQWKLVPDFKLQHUHTXLUHVFRRUGLQDWLRQDQGEDODQFH%HVXUHWR

anticipate that changes in belt speed and incline angle of deck can occur

during workouts, and be attentive in order to avoid loss of balance and

possible injury.

Be sure that the workout space you are utilizing has adequate height clearance, taking

into consideration the height of the user and the ma[imum height of the fully inclined

Deck.

Changing Speed Levels

Push the Speed Level Increase(c) or Decrease(d) buttons to change the Belt Speed at any time in a workout program.

To rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking

Belt will adjust to the desired speed.

Note: After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds.

Pre-Set Incline

Buttons

Incline

Enter

Button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nautilus T628 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nautilus T628

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info