Bedienungsanleitung Nautilus T628 (Seite 52 von 56) (Englisch)

691187

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

Check electrical (wall)

outlet

Make sure unit is plugged into a functioning wall outlet. Test the

outlet with a known functioning device such as a lamp.

Check connection at front

of unit

Connection should be secure and undamaged. Replace power

cord or connection at unit if either are damaged.

Check Power Switch Turn on the power with the Power Switch.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or other-

wise damaged. Replace Console if damaged.

Console Display If Console only has partial display and all connections are ¿ne,

replace the Console.

If the above steps do not resolve the problem, contact your lo-

cal distributor for further assistance.

Unit operates but Contact

HR not displayed

Sensor grip Be sure hands are centered on HR sensors. Hands must be

kept still with relatively equal pressure applied to each side.

Dry or calloused hands Sensors may have dif¿culty with dried out or calloused hands.

A conductive electrode cream (heart rate cream) can help

make better conduct. These are available on the web or at

medical or some larger ¿tness stores.

If tests reveal no other issues, contact your local distributor for

further assistance.

Unit operates but

Telemetric HR not

displayed

Chest Strap Strap should be “POLAR

” compatible and uncoded. Make

sure strap is directly against skin and contact area is wet. Make

sure the transmitter has the curve oriented upward.

Chest Strap Batteries If strap has replaceable batteries, install new batteries.

Check User Pro¿le Select the Edit User Pro¿le option for the User Pro¿le. Go to

the WIRELESS HR setting and make sure that the current

value is set to ON.

Interference Try moving unit away from sources of interference (TV, Micro-

wave, etc).

Replace Chest Strap If interference is eliminated and HR does not function, replace

strap.

Replace Console If HR still does not function, contact your local distributor for

further assistance.

Speed display is not

accurate

Display set to wrong unit

of measure. (English/

Metric)

Change display to show correct units.

Console shuts off (enters

sleep mode) while in use

Check electrical (wall)

outlet

Make sure unit is plugged into a functioning wall outlet. Test the

outlet with a known functioning device such as a lamp.

Check connection at front

of unit

Connection should be secure and undamaged. Replace power

cord or connection at unit if either are damaged.

Check data cable integrity All wires in the cable should be intact. If any are cut or crimped,

replace cable.

TROUBLESHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nautilus T628 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nautilus T628

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info