Bedienungsanleitung Nautilus U618 (Seite 34 von 38) (Englisch)

671457

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

TROUBLESHOOTING

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

Check electrical (wall)

outlet

Make sure unit is plugged into a functioning wall outlet.

Check connection on

console

Connection should be secure and undamaged. Replace

adapter or connection at unit if either are damaged.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or other-

wise damaged. Replace Console if damaged.

Console Display IfConsoleonlyhaspartialdisplayandallconnectionsarene,

replace the Console.

If the above steps do not resolve the problem, contact Cus-

tomer Care for further assistance.

Unit operates but Contact

HR not displayed

HR cable connection at

Console

Be sure cable is connected securely to Console.

Sensor grip Be sure hands are centered on HR sensors. Hands must be

kept still with relatively equal pressure applied to each side.

Dry or calloused hands Sensorsmayhavedifcultywithdriedoutorcallousedhands.

A conductive electrode cream (heart rate cream) can help

make better conduct. These are available on the web or at

medicalorsomelargertnessstores.

Handlebar If tests reveal no other issues, Handlebars should be replaced.

Unit operates but

Telemetric HR not

displayed

Chest Strap (optional) Strap should be “POLAR®” compatible and uncoded. Make

sure strap is directly against skin and contact area is wet.

Chest Strap Batteries If strap has replaceable batteries, install new batteries.

CheckUserProle SelecttheEditUserProleoptionfortheUserProle.Goto

the WIRELESS HR setting and make sure that the current

value is set to ON.

Interference Trymovingunitawayfromsourcesofinterference(TV,Micro-

wave, etc).

Replace Chest Strap If interference is eliminated and HR does not function, replace

strap.

Replace Console If HR still does not function, replace Console.

Unit operates but

Telemetric HR displayed

incorrectly

Interference Make sure that the HR receiver is not blocked by a personal

electronic device in the left side of the media tray.

No speed/RPM reading,

Console displays “Please

Pedal” error code

Check data cable integrity All wires in cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check magnet position

(requires shroud removal)

Magnet should be in place on pulley.

Check Speed Sensor

(requires shroud removal)

Speed sensor should be aligned with magnet and connected to

data cable. Realign sensor if necessary. Replace if there is any

damage to the sensor or the connecting wire.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nautilus U618 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info