Bedienungsanleitung Nautilus U626 (Seite 29 von 36) (Englisch)

736334

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

2. Push the Increase() or Decrease() buttons to set the Heart Rate zone for the workout, and push OK. The Console

shows the Heart Rate zone (percent) on the left, and the Heart Rate range for the User on the right side of the display.

Consultaphysicianbeforeyoustartanexerciseprogram.Stopexercisingifyoufeelpainortightnessinyourchest,

become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calcu-

lated or measured by the machine’s computer for reference purposes only. The heart rate displayed on the console

isanapproximationandshouldbeusedforreferenceonly.

3. Push the Increase() or Decrease() buttons to select the Goal type, and push OK.

4. Push the Increase() or Decrease() buttons to set the value for the workout.

5. PushOKtostarttheworkout.

Changing a Workout Program During a Workout

The Console allows a different Workout Program to be started from an active workout.

1. From an active workout, push PROGRAMS.

2. Push the Increase() or Decrease() buttons to select the desired workout program, and push OK.

3. Push the Increase() or Decrease() buttons to select the Goal type, and push OK.

4. Push the Increase() or Decrease() buttons to set the value for the workout.

5. PushOKtostoptheactiveworkoutandstartthenewworkout.

ThepreviousworkoutvaluesaresavedtotheUserProle.

Pausing or Stopping

TheConsolewillgointoPauseModeiftheuserstopspedalingandpushesPAUSE/ENDduringaworkout,orthereisno

RPMsignalfor5seconds(usernotpedaling).TheConsolewillcyclethroughaseriesofmessagesthatchangeevery4

seconds:

 -WORKOUTPAUSED

 -PEDALTOCONTINUE(ifabike)/STRIDETOCONTINUE(ifanelliptical)

 -PUSHENDTOSTOP

During a paused workout, you can use the Increase/Decrease buttons to move through the result channels manually.

1. StoppedalingandpushthePAUSE/ENDbuttontopauseyourworkout.

2. To continue your workout, push OK or start pedaling.

Tostoptheworkout,pushthePAUSE/ENDbutton.TheConsolewillgointoResults/CoolDownmode.

Results / Cool Down Mode

After a workout the GOAL display shows 03:00 and then starts to count down. During this Cool Down period, the Console

showstheWorkoutResults.AllworkoutsexceptQuickStarthavea3-minuteCoolDownperiod.

The LCD display shows the Current Workout values in three channels:

a.) TIME(total),DISTANCE(total),andCALORIES(total)

b.) SPEED(average),RPM(average),andHEARTRATE(average)

c.) TIME(average),LEVEL(average),andCALORIES(average).

Push the Left() or Right() buttons to move through the result channels manually.

During the Cool Down period, the Resistance Level will adjust to a third of the average Level of the workout. The Cool

Down resistance level can be adjusted with the Resistance Increase and Decrease buttons, but the Console will not dis-

play the value.

YoucanpushPAUSE/ENDtostoptheResults/CoolDownperiodandgobacktoPower-UpMode.IfthereisnoRPMor

HR signal, the Console automatically goes into Sleep Mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nautilus U626 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nautilus U626

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info