Bedienungsanleitung Navigon p 9611 porsche (Seite 13 von 25) (Englisch)

162371

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

74 – 75

It is possible to plan routes at home without GPS

reception, in order to, for example, to plan a vacation

route based on a defined route.

6.1 Planning routes

1. In the main window, touch the OPTIONS button.

The options list opens.

2. Select ROUTE PLANNING. The ROUTE

PLANNING window opens.

6.1.1 Enter the starting point

The starting point of a route is the point at which

you want to begin your trip. This can differ from

your current location.

The starting point is only important if you want to

see a planned route on the map, but currently have

no GPS reception or you are not currently at the

planned starting point. The starting point that you

enter therefore has the flow number “0”.

As soon as you begin navigation, your current

location will be used as the basis for the route

calculation.

The first stage is therefore the trip to the route stage

with the flow number “1”.

1. Touch the SPECIFY STARTING POINT field.

The STARTING POINT menu opens.

If you want to enter your current location as the

starting point:

2. Tap on the CURRENT POSITION menu point.

If you want to enter a different starting point:

3. Touch the corresponding button.

4. Enter the desired starting point.

5. Touch the SET STARTING POINT button. The

selected starting point will now be shown next

to the 0

[

Starting point

]

button.

Change the starting point

Touch the SPECIFY STARTING POINT field. The

STARTING POINT menu opens.

You can now enter a different starting point.

Proceed as described above.

6.1.2 Entering route stages

Route stages are points within the route that you

want to navigate to.

In front of every route stage is its flow number on a

button.

1. Touch the SPECIFY ROUTE POINT field.

The ROUTE POINT menu opens.

2. Select the type of destination entry.

3. Enter the route point.

4. Touch the ADD button. The selected route

stage will now be shown next to its flow

number.

Repeat this step for each additional destination that

you want to add to your route.

6.1.3 Editing route stages

Route stages can be deleted from a route. The

order of the route stages can be varied as you wish.

Note: the starting point cannot be moved or

deleted.

– Touch the route point that is to be edited.

The context menu contains the following buttons:

ROUTE POINT UP: Moves the selected

route stage up.

[

e.g., route stage 2 will become

route stage 1

]

ROUTE POINT DOWN: Moves the

selected route stage down.

[

e.g., route point 2 will

become route point 3

]

DELETES the selected route stage.

A dialog box prompts you to confirm.

6.2 Managing routes

Each planned route can be saved under a particular

name.

Note: only the route starting points and the

route stages will be saved, not the calculated

route. If you load a route, you will have to

recalculate it.

Stored routes can be loaded, renamed or deleted.

6.2.1 Saving a route

The ROUTE PLANNING window is open. You have

entered the starting point and at least one route

stage.

1. Touch the OPTIONS button.

2. Select SAVE ROUTE.

3. Enter the name for the route.

4. Touch the SAVE button.

The destination is now entered into the SAVED

ROUTES list.

6.2.2 Loading a route

1. Touch the OPTIONS button.

2. Select SAVED ROUTES.

3. Touch your desired route.

Touch the LOAD ROUTE button. The ROUTE

PLANNING window opens. The starting point

and the route stages of the loaded route are

entered.

6.3 Navigation

In order to simulate a route, the system first has to

calculate the route.

6.3.1 Calculating and displaying the route

A route may be calculated and displayed on the

map even without GPS reception in order to get an

impression of the itinerary.

The ROUTE PLANNING window is open. The

starting point and at least one stage have been

entered.

Touch the SHOW ROUTE button. The map

screen opens in PREVIEW mode.The starting

point and the route stages are marked by flags.

For each stage, the distance and the estimated

trip time is given. These data are also given for

the entire trip.

6.3.2 Simulating the route

You can also simulate navigation.

Note: the reception of GPS signals is not

necessary for the simulation. Simulation is

restricted to routes of max 60 mi.

You have calculated and displayed a route.

1. Touch the OPTIONS button.

2. Select SIMULATION.

The route will be recalculated for simulation

purposes. Simulation starts when calculation

has finished.

Ending simulation

You may stop a simulation at any time.

1. Touch the

BACK button. When cancellation of

the simulation has been confirmed, the main

window opens.

06 Routes with various stages

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navigon p 9611 porsche Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info