Bedienungsanleitung Navigon p 9611 porsche (Seite 17 von 25) (Englisch)

162371

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

82 – 83

PAN MODE: If this button is active, the map

section can be moved in the desired direction with a

finger or the pen.

ENTIRE ROUTE: Zooms the map so that the

entire route is visible.

CURRENT POSITION: Selects the map

section shown, so that the current location is

centered.

8.4.1 Working in Destination search mode

Touch the point to which you want to navigate.

The destination that you have selected appears

under the crosshairs.

The geographical coordinates of the destination

and the corresponding address are shown in

the field in the bottom third of the screen.

Touch the

OK button.

Buttons with various functions will appear.

TAKE ME THERE: Begins the navigation to the

selected point. Current navigation will be aborted.

INTERIM DESTINATION: Sets the current

destination as a way point. The navigation system

will then guide you to this way point first. Afterwards,

you can continue your journey to your original

destination. This function is only active when you

are currently navigating.

SET AS DESTINATION: Adds the selected point as

the last point in the route plan. If no route plan has

been opened, the selected point will become the

first point in a new route plan.

SAVE: Opens the SAVE DESTINATION AS …

window. A name can be entered here which will be

used to save the given point in the FAVORITES list.

For detailed information, please refer to chapter

“Saving a destination” on page 73.

NEIGHBORHOOD SEARCH: Opens the POI

NEARBY window. Destinations in the vicinity can be

searched for from here.

–

Touch the

DESTINATION SEARCH button in

order to quit the DESTINATION SEARCH mode.

You will be returned to the window from which

you started this mode.

–

Touch

BACK in order to return to the main

window. If you are currently navigating, you will

be prompted to confirm quitting navigation.

08 Working with the map

Fig. 11

09 Useful functions

9.1 GPS status, store current location

In the GPS STATUS screen, you will find an overview

of the data the navigation system calculates from

the received GPS signals.

GPS status is available from the options of many

windows.

1. Touch OPTIONS.

Select GPS STATUS.

The current location can be stored in the

FAVORITES list.

Touch the SAVE POSITION button. The SAVE

DESTINATION AS ... dialog opens up. The

cursor blinks in the NAME field.

4. Enter a name for the destination.

5. If necessary, define the current position as the

home address.

6. Touch the SAVE button.

9.2 TMC

[

Traffic information

]

Your device has an integrated TMC receiver. The

navigation system will only receive the latest traffic

reports once you have connected your cable to the

car charger. It can dynamically change the route in

order to avoid traffic jams, for example.

The current valid traffic reports are available via the

options of many windows.

1. Touch the OPTIONS button.

2. Select TRAFFIC. The TRAFFIC INFORMATION

window opens.

Via the list, the DISPLAYED INFORMATION

button shows which kind of traffic messaging

is listed and the number of messages received.

3. Touch the DISPLAYED INFORMATION button

to select which traffic messages should be

displayed.

For each traffic message, information about the

location and type of congestion will be shown.

4. Touch a message in order to show more

detailed information.

The navigation system can

AVOID or

IGNORE

congestion on the route. The button AVOID /

IGNORE shows the corresponding status.

Touch the

BACK button to close the TRAFFIC

INFORMATION window.

9.3 TMC Settings

In the TMC SETTINGS window, you can set and

configure the TMC sender, this will determine the

effect that the reception of a message concerning

your route will have on its calculation. Proceed as

follows:

1. Touch the OPTIONS button in the TRAFFIC

INFORMATION window.

2. Select TMC SETTINGS.

Tuning

Touch the TUNING button to determine which

sender should be set, from which you want to

receive traffic information.

AUTOMATIC: The arrow buttons near the sender

can be used to set a different sender. The system

will search for another sender if reception is weak.

HOLD STATION: The arrow buttons near the sender

can be used to set a different sender. The system

will search for the same sender on a different

frequency if the signal is weak.

HOLD FREQUENCY: The arrow buttons near the

sender can be used to set a different sender. The

system will not search for another sender if the

reception is weak.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navigon p 9611 porsche Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info