512550
7
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
7
DEPTH 2100 Installation and Operation Manual
NAVMAN
3. Continue to hold . The
display will indicate the
current master/slave
selection.
4. Continue to hold
until the display indicates
the current linked/separate selection.
Linked Separate
5. Use
and to change the selection.
6. To exit this mode, press and hold both
and
Linked or Separate Selection
By default a dual station pair of Depth 2100
instruments automatically keep the following settings
the same in both instruments:
Alarms On/Off
Alarm Values (Deep and Shallow)
Keel Offset (see note)
Units of measure (see note)
Example: Switching an alarm off on the slave
instrument will also switch the alarm off on the master
instrument. The reverse also applies, alarms
changed on the master will be automatically changed
in the slave instrument.
Note: The keel offset and units of measure should
only be changed on the Master instrument.
If independent settings are required the link feature
can be disabled.
To enable or disable the linked mode:
1. Apply power while holding down
.
OFF
V
2. When the unit is on. The
display will first indicate the
current display unit:
Your depth sounder is designed for years of trouble free operation assuming proper installation and care are
provided. Following the operation and installation guidelines in this manual should ensure optimum
performance of the instrument. In the unlikely event that the instrument shall fail to perform or shall need
servicing, contact the dealer whom you purchased your Depth 2100 from.
4 Maintenance
Hold down during power up
Example
Slave
8Ft
simultaneously. Alternatively, if no keys are
pressed for a period of 5 seconds normal
depth display will commence.
OFFON
^
V
Press simultaneously
Note: This setup procedure applies to the master
device and all slave devices. For separate
operation all devices, including the master, must
be set to Separate mode. Also, for linked operation
all devices, including the master, must be set to
Linked mode.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Navman Depth 2100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Navman Depth 2100

Navman Depth 2100 Bedienungsanleitung - Deutsch - 10 seiten

Navman Depth 2100 Bedienungsanleitung - Holländisch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info