Bedienungsanleitung Navman FISH 4500 (Seite 9 von 36) (Englisch)

470004

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Press MENU once or more until the Setup menu

is displayed, then select System:

Language

Select the language for the displays. The options

are: English, Italian, French, German, Spanish,

Dutch, Swedish, Portuguese, Finnish Greek

and Chinese.

Tip: In case you can’t read the current language,

the language setting is found at the top of the

system menu.

Backlight

The backlight control is displayed. The bar setting

represents the current level of backlighting.

Key beep

Enables or disables the beep when a key is

pressed.

3-1 Setup > System

3-2 Setup > Sonar

Press MENU once or more until the Setup menu

is displayed, then select Sonar:

Auto power off

Select to have the fishfinder power off automatically

every time the boat’s ignition is switched off. This

applies only if the display unit is wired for Auto

Power. See section 6-5 Wiring Options.

Style

Use this to choose the appearance of the

FISH 4500/4600 interface. Select Classic to

have the fishfinder interface use the same style

as a TRACKER 5500/5600. Otherwise, select 3D

for a strong, proportional font.

Factory reset

This option returns all of the fishfinder settings

(except the language) to the default factory set-

tings shown in section 3 Setting up the FISH

4500/4600.

A warning box asks: Are you sure? Select Yes

and press ENT to confirm.

Sonar (FISH 4600 only)

Select to enable sonar functions. Deselect if the

unit is to be used as a SmartCraft only display.

SmartCraft (FISH 4600 only)

Select to enable SmartCraft functions. Smart-

Craft is only available with certain Mercury

engines, and requires an optional SmartCraft

Gateway.

Scroll speed

Use this to set the scroll speed on the display.

There is a choice of: Very Fast, Fast, Me-

dium, Slow and Pause. The depth of the water

also affects the speed of the display.

Faster scroll speeds combined with a slow boat

speed (typically between 2 and 6 knots) shows the

most fish detail. Medium or Slow scroll speeds

result in sonar information being displayed over a

longer period, but with less detail. See Section 4-1

Interpreting the display, for more information.

Fish symbols

These appear only in the main sonar displays. Fish

symbols can be shown in three ways:

• As a fish symbol (On).

• As a fish symbol with the depth (On+depth).

The depth is shown beside the fish symbol.

• Switched off (Off) so that echoes are not

converted to fish symbols but are displayed

directly.

See section 4-3 Fish detection and display, for

more information about fish symbols.

Frequency

There is a choice of: 200 kHz, 50 kHz and

Mixed. For information about selecting a suitable

frequency for the water conditions, see section

4-2 Single and Dual frequency fishfinding.

FISH 4500/4600 Installation and Operation Manual 9

NAVMAN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman FISH 4500 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman FISH 4500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info