27695
112
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
PiN 570 | User Manual
112
6.1 I cannot transfer
data using an
infrared
connection
Trying to transfer
too much data
Transfer only one file, or no more than 25 contact cards,
at a time.
6.2 Infrared
connection not
recognized
IR ports not
aligned
Position the IR ports so that they line up in a distance less
than 20 cm (8 inches) but more than 5 cm (2 inches)
apart. Ensure that there are no physical obstacles
between the IR ports.
6.3 Infrared
connection not
recognized
Lighting
interference
Some types of light interfere with IR communications. Try
moving to a different location or turning off some lights.
7 Network Synchronization Problems
7.1 I cannot connect
to my network
Network card
incompatibility
Make sure that your network card is compatible with your
PiN
7.2 I cannot connect
to my network
Drivers not
installed
Make sure that you have installed the proper drivers for
your PiN
7.3 I cannot connect
to my network
Network card
properties
incorrectly set
In the properties for your network card, make sure that
you have correctly configured the IP settings, and the
addresses of your DNS servers and/or WINS servers.
Your network administrator can verify this
7.4 I cannot connect
to my network
Server
information not
provided
Make sure that you have added necessary server
information. Tap
Æ
Settings Æ Connections tab Æ
Connections Æ Advanced tab Æ Network Card. Select
the installed network card (usually the card’s name) and
enter any necessary information. Most networks use
DHCP to assign IP addresses dynamically; you should not
have to change or enter any IP address settings unless
your network administrator instructs you to do so
7.5 I cannot connect
to my network
Incorrect user
name or
password
Verify with your network administrator that your user name
and password are correct.
7.6 I cannot connect
to my network
Network
unavailable
Verify with your network administrator that the network is
available and you are authorized to connect to it.
7.7 I cannot connect
to my network
PiN of the same
name already
connected
Change your PiN’s PiN name. Tap
Æ
Settings Æ
System tab Æ About Æ PiN ID tab.
7.8 I cannot
synchronize
across my
network
Network
connection not
present in Active
Sync
If Network Connection is not listed as a connection
method in the ActiveSync dialog box when starting
synchronization, wait a few minutes and try again. Also, if
synchronization does not start right away, the network is
probably busy, and it may take a minute for your Pocket
PC to connect to the network.
112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Navman PiN570 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Navman PiN570

Navman PiN570 Bedienungsanleitung - Deutsch - 120 seiten

Navman PiN570 Bedienungsanleitung - Französisch - 120 seiten

Navman PiN570 Bedienungsanleitung - Italienisch - 120 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info