Bedienungsanleitung Navman PiN570 (Seite 115 von 116) (Englisch)

27695

115

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

PiN 570 | User Manual

115

Battery

Please read and follow the handling instructions for the battery before use. Improper use of the battery may

cause heat, fire, explosion, damage or capacity deterioration of the battery. However, the manufacturer will

not guarantee against any accident caused by the usage which is not written here.

DANGER

• Do not dip or wet the battery in water, seawater, or other liquid. If the protecting pin assembled in the

battery is damaged, the battery may be charged with an abnormal current and voltage, which may

result in the cause of heat generation, explosion, or fire of the battery.

• The battery has a predetermined polarity. If the battery will not connect well to the charger or

equipment, do not try to connect the battery forcefully. Check the polarity first. In the case the battery is

connected in reverse, it is charged reversely and may cause acid leakage, heat generation, explosion,

or fire due to an abnormal chemical reaction.

• Do not put the battery into a fire or heat it. In such a case, the insulator in the battery may be melted,

the safety vent and structure may be damaged, all of which may cause heat generation, explosion, or

fire.

• Do not connect the battery reversed in positive (+) and negative (-) terminals in the charger or

equipment. In the case the battery is connected in reverse, it is charged reversely during charge, and

causes an excessive current during discharge, and may cause heat generation, explosion, or fire due to

an abnormal chemical reaction.

• Do not let the battery terminals ( + and - ) contact a wire or any metal ( like a metal necklace or a

hairpin ) with which it carried or stored together. In such a case, the battery is shorted and causes an

excessive current, which may result in heat generation, explosion, or fire.

• Do not apply heavy impact to the battery, or throw or drop it. Strong impact may damage the

protecting pin, which may result in heat generation, explosion, or fire of the battery.

• Do not drive a nail in, hit with a hammer, or stamp on the battery. In such a case, the battery may be

deformed and shorted, and the protecting pin may be damaged, which may cause heat generation,

explosion, or fire of the battery.

• Do not solder the battery directly. Heat applied during soldering may damage the insulator or the safety

vent and mechanism, which may result in acid leakage, heat generation, explosion, or fire of the

battery.

• Do not disassemble or alter the battery. The battery contains a safety mechanism and a protecting pin

in order to avoid any danger. If these are damaged, heat, explosion or fire may be caused.

• Charge the battery every 6 months to the amount specified by the manufacturer, even if the battery is

not used. An excessive over-discharge may cause an abnormal chemical reaction, which may result in

the cause of acid leakage, or fire of the battery.

About the Infrared LED

The IR port located on the Pocket PC is evaluated as a Class 1 LED (Light-Emitting Diode) device according

to International Standard IEC 60 825-1 (EN60825-1) requirements.

CLASS 1 LED PRODUCT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman PiN570 Seite 115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman PiN570

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info