Bedienungsanleitung Navman Tracker 5100i (Seite 6 von 42) (Englisch)

512564

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

TRACKER 5100/5100i/5500/5500i Installation and Operation Manual

NAVMAN

1-2 Plug-in cards

1 Introduction

TRACKER chartplotters

NAVMAN’s TRACKER chartplotters are compact,

ruggedly built, highly integrated navigation instruments.

They have been designed to be easy to use. Complex

navigation functions can be performed with a few key

presses, taking the hard work out of navigation.

This manual covers these NAVMAN chartplotters:

TRACKER 5500

Colour display, external GPS antenna.

TRACKER 5500i

Colour display, internal GPS antenna.

TRACKER 5100

Greyscale display, external GPS antenna.

TRACKER 5100i

Greyscale display, internal GPS antenna.

The TRACKER has a built-in chart of the world,

suitable for route planning and general interest. To

see chart details for a region, plug in a C-MAP™ chart

card (an electronic chart).

The TRACKER receives information from the GPS

system and displays the boat’s position and speed.

The TRACKER can navigate to a point or can navigate

along a route. When the boat is navigating to one of

these points, the TRACKER displays course

information for the helmsman to follow.

The TRACKER can control an autopilot and can

display depth information from a depth sounder. With

an optional fuel kit, the TRACKER becomes a

sophisticated yet easy to use fuel computer. Navigation

data can be saved to a plug-in user card so that it can

be easily transferred to another NAVMAN chartplotter.

The TRACKER is part of the NAVMAN family of

instruments, which includes instruments for speed,

depth, wind and repeaters. These instruments can be

connected together to form an integrated data system

(see section 14).

For maximum benefit, please read this manual

carefully before installing and using the unit. Special

terms are explained in appendix C.

Cleaning and maintenance

Caution should be used when cleaning the TRACKER,

and especially the screen of the TRACKER. Only use

a clean sponge or chamois soaked in fresh water and

mild detergent. Never use a dry cloth as this may drag

dried salt crystals across the screen resulting in

scratching. Do not use any form of abrasive cleaner,

solvent, petrol or other chemical cleaner.

Push the dust cover over the display when the

TRACKER is turned off.

1-1 Care

Plug-in cards

Handle plug-in cards carefully. Keep them in their

protective cases when not plugged into the TRACKER.

If a card gets dirty or wet, clean it with a damp cloth

or mild detergent.

Keep the card holder in place in the display unit at all

times to prevent moisture from entering the card

compartment.

The TRACKER can use two kinds of plug-in cards:

C-MAP™ chart card have chart details required

for navigating in a particular region. When a chart

card is plugged in, the extra details automatically

appear on the TRACKER’s chart display.

C-MAP™ user cards are used to store navigation

data. Each user card expands the TRACKER’s

memory and allows the data to be transferred to

another TRACKER easily (see section 11).

When a card is inserted or removed it does not matter

if the TRACKER is turned on or off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman Tracker 5100i Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman Tracker 5100i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info