Bedienungsanleitung Navman Tracker 5430 (Seite 13 von 44) (Englisch)

512565

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

TRACKER 5430/5430i Installation and Operation Manual

NAVMAN

If the cursor has been moved in the last ten

seconds, then the position is the cursor’s

position, and the latitude has a cursor symbol to

show this:

3-1-3 Chart scale

Press to zoom in and display a smaller area of

the chart in more detail. Press to zoom out and

display a bigger area in less detail.

The chart scale can be displayed (e.g. scale

= 8 nm, see below). The scale is the vertical

distance across the currently visible chart area.

For example if the scale is 8 nm then a portion

of chart eight nautical miles high is currently

displayed.

3-1-4 The compass

A compass can be displayed at the top of the

chart (see section 3-1-8).

When the boat is navigating to a point, the

compass shows the bearing to the destination

(BRG) in the middle and the boat’s course over

ground (COG), for example here BRG is 4° and

COG is 12°:

Otherwise the compass shows the boat’s COG in

the middle, for example here COG is 12°:

3-1-5 Chart symbols

The chart will show symbols, such as waypoints

and chart symbols. When the cursor is placed

over a symbol for at least two seconds, a data

window appears at the bottom left of the display

with information about the symbol.

Warning: When reading the boat position,

make sure the position is not the cursor

position.

3-1-6 Chart information

To see stored data about a point on the chart (for

example, a chart symbol):

1 Move the cursor to that point on the chart.

2 Press MENU and select Chart info.

3 A menu of objects is displayed:

i Select an object to display.

ii Press ESC to return to the menu. Select

other objects.

iii Finally, press ESC to return to the chart.

3-1-7 Find nearby services

To find and display nearby services:

1 To see services near the boat’s position, press

ESC to switch to centre on boat mode. To

see services near a different point, move the

cursor to that point on the chart.

2 Press MENU and select Find.

3 Select the type of service. There are three

types of service:

Ports

A list of ports is displayed. Select the port

to display.

To search for a port:

i Press MENU and select Find.

ii Enter some or all of the letters of the

port name. Press ENT.

Port services

i Select the type of service to find.

ii A list of places with this service are

displayed. Select the place to display.

Tide stations

A list of tide stations is displayed. Select

the station to display. The chart redraws

with the tide station centred. To now

display a tide chart (see section 8) for the

station:

i Press MENU and select Chart info.

ii Select Tide height.

3-1-8 Change the data display and compass

display

Numeric data and a compass can be displayed at

the top of the chart display. To change these:

1 Press MENU and select Data header.

2 To turn the data display off or on:

i Select Data.

ii Select Off or On.

COG

Minutes, to 3 decimal places

(about 2 m (6 ft) resolution)

Degrees

36° 29.637' S

175° 09.165

' E

Latitude

Longitude

+ 36° 29.684' S

175° 09.201

' E

BRG

COG

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman Tracker 5430 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman Tracker 5430

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info