Bedienungsanleitung Navman Tracker 5430i (Seite 6 von 44) (Englisch)

512566

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

TRACKER 5430/5430i Installation and Operation Manual

NAVMAN

1-2 Plug-in cards

1 Introduction

TRACKER chartplotters

NAVMAN’s TRACKER chartplotters are compact,

ruggedly built, highly integrated navigation

instruments. They have been designed to be

easy to use. Complex navigation functions can

be performed with a few key presses, taking the

hard work out of navigation.

This manual covers these NAVMAN chartplotters:

TRACKER 5430

Greyscale display, external GPS antenna.

TRACKER 5430i

Greyscale display, internal GPS antenna.

The TRACKER has a built-in chart of the world,

suitable for route planning and general interest.

To see chart details for a region, plug in a C-MAP™

chart card (an electronic chart).

The TRACKER receives information from the GPS

system and displays the boat’s position and speed.

The TRACKER can navigate to a point or can

navigate along a route. When the boat is

navigating to one of these points, the TRACKER

displays course information for the helmsman

to follow.

The TRACKER can control an autopilot and can

display depth information from a depth sounder.

With an optional fuel kit, the TRACKER becomes

a sophisticated yet easy to use fuel computer.

Navigation data can be saved to a plug-in user

card so that it can be easily transferred to another

NAVMAN chartplotter.

The TRACKER is part of the NAVMAN family

of instruments, which includes instruments

for speed, depth, wind and repeaters. These

instruments can be connected together to form

an integrated data system (see section 14).

For maximum benefit, please read this manual

carefully before installing and using the unit.

Special terms are explained in appendix C.

Cleaning and maintenance

Caution should be used when cleaning the

TRACKER, and especially the screen of the

TRACKER. Only use a clean sponge or chamois

soaked in fresh water and mild detergent. Never

use a dry cloth as this may drag dried salt crystals

across the screen resulting in scratching. Do not

use any form of abrasive cleaner, solvent, petrol

or other chemical cleaner.

Push the dust cover over the display when the

TRACKER is turned off.

1-1 Care

Plug-in cards

Handle plug-in cards carefully. Keep them in

their protective cases when not plugged into the

TRACKER.

If a card gets dirty or wet, clean it with a damp

cloth or mild detergent.

Keep the card holder in place in the display unit

at all times to prevent moisture from entering the

card compartment.

The TRACKER can use two kinds of plug-in cards:

C-MAP™ chart cards have chart details

required for navigating in a particular

region. When a chart card is plugged in, the

extra details automatically appear on the

TRACKER’s chart display.

C-MAP™ user cards are used to store

navigation data. Each user card expands the

TRACKER’s memory and allows the data to be

transferred to another TRACKER easily (see

section 11).

Note: The older 5 volt user cards are not

supported.

When a card is inserted or removed it does not

matter if the TRACKER is turned on or off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman Tracker 5430i Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman Tracker 5430i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info