Bedienungsanleitung Navman Tracker 5500i (Seite 24 von 42) (Englisch)

512562

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

TRACKER 5100/5100i/5500/5500i Installation and Operation Manual

NAVMAN

11 User card display

A C-MAP™ user card is an optional plug-in card

that can store data files (see section 1-2). There

are three types of files: waypoints, routes or a track.

To go to the user card display, press DISP and

select User card.

The user card display has:

File list

A list of the files on any user card in the TRACKER.

Waypts, Routes

The number of waypoints and routes

currently in the TRACKER.

Track 1 to Track 5

The number of points in tracks 1 to 5

currently in the TRACKER.

Note:

To save TRACKER data onto the user card,

use the Save command (see below).

Data stored on the user card and shown on

the file list is not available to be used by the

TRACKER until loaded into the TRACKER

with the LOAD command (see below).

Saving TRACKER data to the user

card

This saves all the TRACKER’s waypoints, all the

TRACKER’s routes or one of the TRACKER’s

tracks to one file on the user card.

1 Press MENU and select Save.

2 Select Waypts, Routes or Tracks.

3 For Tracks, select the track number to save.

4 The new file is created. Change the name if

required. The new file appears in the file list.

Loading data from the user card to

the TRACKER

This loads one file from the user card to the

TRACKER:

A waypoints file: The new waypoints are

added to any existing waypoints in the

TRACKER. If a new waypoint has the same

name as an existing waypoint but has

different data, the TRACKER displays both

waypoints. Select:

Skip: Do not load the new waypoint.

Replace: Load the new waypoint and

replace the existing one.

Skip all: Do not load any new waypoints

which have the same names as existing

waypoints.

Rplc. all: Load all new waypoints which

have the same names as existing

waypoints; the new waypoints replace the

existing waypoints.

A routes file: The new routes are added to any

existing routes in the TRACKER. If a new route

has the same name as an existing route but

has different data then the TRACKER asks

which route to keep.

A track file: The new track will replace the

existing track in the TRACKER.

To load a file to the TRACKER:

1 Select the file to load.

2 Press MENU and select Load.

Deleting a file from the user card

1 Select the file to delete.

2 Press MENU and select Delete.

3 Select Yes to confirm.

Reading the file information

This reads the file names from the user card and

displays them. Reading does not load any file data

into the TRACKER.

1 Press MENU and select Card.

2 Select Read.

Formatting the user card

Formatting prepares a user card for use. Format the

card if there is an error message saying that the card

is not formatted. Any data files on the card are deleted.

1 Press MENU and select Card.

2 Select Format.

3 Select Yes to confirm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman Tracker 5500i Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman Tracker 5500i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info