Bedienungsanleitung Navman Trackfish 6600 (Seite 25 von 83) (Englisch)

512557

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

TRACKFISH 6600 Installation and Operation Manual26

NAVMAN

Warning: Do not create a navigation

waypoint on land or in dangerous water.

5-2-1 Creating a new waypoint

Creating a new waypoint from any display

Press

. A new waypoint is created at

the boat position with the default name

and data. To change the default data, see

section 5-2-3.

Creating and editing a new waypoint from

the chart display

1 To create a waypoint at the boat position,

press ESC to switch the chart to centre

on boat mode.

Or, to create a waypoint at a different

point, move the cursor to that point on the

chart.

2 Press MENU and select New waypoint.

3 A new waypoint, with the default name

and data is created.

4 Change the waypoint data if necessary

(see section 5-2-7). Select Save.

Creating a new waypoint from the waypoints

display

1 In the waypoints display, press MENU

and select Create.

2 A new waypoint, with a default name and

data, is created at the boat position.

3 Change the waypoint data if necessary

(see section 5-2-7). Select Save.

Note: Waypoints can also be created when a

route is created (see section 6-2-1).

5-2-2 Moving a waypoint

Moving a waypoint from the chart display

1 In the chart display, move the cursor to

the waypoint to move.

2 Press MENU and select Move.

3 Move the cursor to the new position and

press ENTER.

Moving a waypoint from the waypoints

display

To move a waypoint from the waypoints

display, edit the waypoint (see section 5-2-3)

and change the latitude and longitude.

5-2-3 Editing a waypoint

Editing a waypoint from the chart display

1 In the chart display, move the cursor to

the waypoint to edit.

2 Press MENU and select Edit.

3 Change the waypoint data (see section

5-2-7). Select Save.

Editing a waypoint from the waypoints

display

1 In the waypoints display, press

to highlight the waypoint to edit. Press

MENU and select Edit.

2 Change the waypoint data (see section

5-2-7). Select Save.

5-2-4 Displaying a waypoint on

the chart

This goes to the chart display, and shows the

selected waypoint at the centre of the display.

1 In the waypoints display, press or

to highlight the waypoint to display. Press

MENU and select Display.

Or, in the Chart display, press MENU,

select Find, then select Waypoints.

Select a waypoint from the list.

2 The TRACKFISH switches to the chart

display, with the selected waypoint at the

centre of the chart.

5-2-5 Deleting a waypoint

A waypoint can not be deleted if the boat is

navigating to it or if the waypoint is used in more

than one route. A waypoint that is used in one

route can be deleted.

Warning when a waypoint is deleted from

a route, check that the changed route does

not cross land or dangerous waters.

Deleting a waypoint from the chart display

1 In the chart display, move the cursor to

the waypoint to delete.

2 Press MENU and select Delete.

3 Select Yes to conﬁ rm.

Deleting a waypoint from the waypoints

display

1 In the waypoints display, press

to highlight the waypoint to delete. Press

MENU and select Delete.

2 Select Yes to conﬁ rm.

5-2 Managing waypoints

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman Trackfish 6600 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman Trackfish 6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info