Bedienungsanleitung Navman TRACKFISH_6500 (Seite 22 von 88) (Englisch)

28502

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

TRACKFISH 6500 Installation and Operation Manual22

NAVMAN

Warning: When reading the boat

position, make sure the position is not the

cursor position.

3-2-3 Chart scale

Press to zoom in and display a smaller area

of the chart in more detail. Press to zoom

out and display a bigger area in less detail.

The chart scale is displayed at the top left of

the chart:

3-2-4 Chart symbols and information

The chart shows many kinds of symbols,

such as waypoints, ports, marinas, buoys and

beacons. If necessary, press or or

to choose a chart scale where the symbol is

displayed.

To see stored information about a symbol:

1 Either move the cursor to the symbol on

the chart and wait two seconds

or use Find to move the cursor to a symbol

for a port or service (see section 3-2-5).

2 A window appears at the bottom of the

display with some information about the

symbol.

3 To see more detail about a symbol or a list

of associated items for the symbol, press

i Select an item to display. If there are

more items than will fit on the display,

press or to scroll up or down.

Select a camera icon to display a photo

of the item. If the photo is too big to fit

on the display, press , , or to

scroll the photo.

Select Tide Height Station to

display a tide chart for the position (see

section 13).

ii Select other items or press to

return to the chart.

To see stored information about nearby

symbols press and select Chart

info. Then follow step 3 above.

3-2-1 Chart modes

The Chart has two modes:

Centre on boat mode

To switch to centre on boat mode in the chart

display, press . The boat is at the centre

of the chart. As the boat moves through the

water, the chart automatically scrolls to keep

the boat in the centre of the chart. The cursor

(see below) is turned off.

Cursor mode

The keys and are called cursor

keys. To switch to cursor mode in the chart

display, hold down a cursor key. The cursor

appears and moves away from the boat:

Press the key which points in the direction

that the cursor will move, for example press

to move the cursor down.

Press midway between two of the cursor

keys to make the cursor move diagonally.

Hold a cursor key down to make the cursor

move continuously across the display.

In Cursor mode:

The distance ( DST) and bearing ( BRG)

of the cursor from the boat are displayed at

the bottom corner of the display.

The chart does not scroll as the boat moves.

If the cursor reaches the edge of the

display, the chart will scroll.

For example, hold down to move the

cursor to the right side of the display and

the chart will scroll to the left.

3-2-2 Latitude and longitude

Latitude and longitude can be displayed in

the data header. The display is degrees and

minutes to three decimal places, about 2 m

(6 ft) resolution. Normally the position is the

boat’s position, and the latitude and longitude

has a boat symbol to show this:

36° 29.637’ N or S Latitude

175° 09.165’ E or W Longitude

If the cursor has been moved in the last ten

seconds, then the position is the cursor’s

position, and the latitude and longitude has a

cursor symbol to show this:

36° 29.841’ N or S Latitude

175° 09.012’ E or W Longitude

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman TRACKFISH_6500 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman TRACKFISH_6500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info