Bedienungsanleitung Navman TRACKFISH_6500 (Seite 26 von 88) (Englisch)

28502

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

TRACKFISH 6500 Installation and Operation Manual26

NAVMAN

Warning: Do not create a navigation

waypoint on land or in dangerous water.

5-2-1 Creating a new waypoint

Creating and editing a new waypoint from

the chart display

1 To create a waypoint at the boat position,

press ESC to switch the chart to centre on

boat mode.

Or, to create a waypoint at a different point,

move the cursor to that point on the chart.

2 Press .

3 A new waypoint, with the default name and

data is created.

4 Change the waypoint data if necessary (see

section 5-2-7).

Creating a new waypoint from the waypoints

display

1 In the waypoints display, press and

select Create.

2 A new waypoint, with a default name and

data, is created at the boat position.

3 Change the waypoint data if necessary (see

section 5-2-7).

Note: Waypoints can also be created when a

route is created (see section 6-2-1).

5-2-2 Moving a waypoint

Moving a waypoint from the chart display

1 In the chart display, move the cursor to the

waypoint to move.

2 Press and select Move.

3 Move the cursor to the new position and

press .

Moving a waypoint from the waypoints

display

To move a waypoint from the waypoints

display, edit the waypoint (see section 5-2-3)

and change the latitude and longitude.

5-2-3 Editing a waypoint

Editing a waypoint from the chart display

1 In the chart display, move the cursor to the

waypoint to edit.

2 When the waypoint data is displayed, press

3 Change the waypoint data

(see section 5-2-7).

Editing a waypoint from the waypoints

display

1 In the waypoints display, press or

to highlight the waypoint to edit. Press

and select Edit.

2 Change the waypoint data

(see section 5-2-7).

5-2-4 Displaying a waypoint on the chart

This goes to the chart display, and shows the

selected waypoint at the centre of the display.

1 In the waypoints display, press or

to highlight the waypoint to display. Press

and select Display.

Or, in the Chart display, press , select

Find, then select Waypoints. Select a

waypoint from the list.

2 The TRACKFISH switches to the chart

display, with the selected waypoint at the

centre of the chart.

5-2-5 Deleting a waypoint

A waypoint can not be deleted if the boat is

navigating to it or if the waypoint is used in

more than one route. A waypoint that is used in

one route can be deleted.

Warning when a waypoint is deleted from

a route, check that the changed route does

not cross land or dangerous waters.

Deleting a waypoint from the chart display

1 In the chart display, move the cursor to the

waypoint to delete.

2 Press and select Delete.

3 Select Yes to confirm.

Deleting a waypoint from the waypoints

display

1 In the waypoints display, press or

to highlight the waypoint to delete. Press

and select Delete.

2 Select Yes to confirm.

5-2 Managing waypoints

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman TRACKFISH_6500 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman TRACKFISH_6500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info