Bedienungsanleitung Navman TRACKFISH_6500 (Seite 61 von 88) (Englisch)

28502

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

TRACKFISH 6500 Installation and Operation Manual 61

NAVMAN

Press once or more until the Setup

menu is displayed, then select Sonar:

Frequency

There is a choice of: 200 kHz, 50 kHz and

Mixed. For information about selecting a

suitable frequency for the water conditions,

see section 8-3.

Scroll speed

Use this to set the scroll speed on the display.

There is a choice of: Very Fast, Fast,

Medium, Slow and Pause. The depth of the

water also affects the speed of the display.

Faster scroll speeds combined with a slow

boat speed (typically between 2 and 6 knots)

shows the most fish detail. Medium or Slow

scroll speeds result in sonar information being

displayed over a longer period, but with less

detail (see Section 8-2).

Fish symbols

The TRACKFISH always displays echoes from

fish (fish arches, see section 8-4). If fish symbols

are on, a symbol is displayed over the arch (see

section 8-4). The options are:

• Off: No fish symbol is displayed.

• Fun or Normal: A fish symbol is

displayed.

• Fun + depth or Normal + depth: A

fish symbol is displayed and the depth shown

beside the fish symbol.

Fish filter

Use this to select the minimum fish size that

will be displayed as a fish symbol and to trigger

the Fish alarm. The options are: Small,

Medium and Large.

17-3 Setup > Sonar

Fish sensitivity

Selects the minimum strength fish echo that

will be displayed as a fish symbol. Higher

values will display more fish symbols.

Digit size

Use this to remove or change the size of the

depth display on the sonar displays. There is a

choice of: Small, Medium and Large.

Palette

Use this to select a colour palette. Each colour

within the palette represents a different echo

strength, as shown on the sonar displays.

There is a choice of five colour palettes: Black,

Blue, White, Vivid and 8 colour. The

first four pallettes display more detail, and

each colour covers a 1.5 dB signal range. The 8

colour palette displays less detail, and each

colour covers a 3 dB signal range.

Interference filter

No filter, normal setting.

Filters the echo signal to remove spiky

interference such as engine noise or depth

sounders on nearby boats.

Noise filter

Averages the echo signal to remove rapid

changes. Select Meduim or High to give a

smoother bottom trace–this may help to detect

a deeper bottom; however these settings may

also remove fish echoes. Select Off for best

fishfinding.

Pulse length

This can be used to specify the length of the

transmitted ultrasonic pulse. A short pulse

length improves the display detail but contains

less energy, therefore it does not penetrate as

deeply into the water as a longer pulse.

There is a choice of Auto, Short, Medium

or Long. The Auto setting is recommended.

Pulse power

This can be used to specify the power output

of the transmitted ultrasonic pulse. Low power

output conserves the battery and produces a

clear display in shallow water.

There is a choice of Auto, Low, Medium or

High. The Auto setting is recommended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman TRACKFISH_6500 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman TRACKFISH_6500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info