1. SYSTEM COMPONENTS 3Lion + 3Link.
Battery LiFePo4 ' 3Lion '
Display ' 3Link '
Display mounting bracket
Advanced BMS ' 3Link '
Assembly screws (n°. 8)
Use and maintenance manuals
Display connection cable
2. SAFETY
This manual serves as a guide for the installation, use and maintenance of
the 3Lion + 3Link system. It is compulsory to carefully read all its parts
for both the installer and the end user.
Keep the device out of the reach of children.
Read this manual carefully and keep it handy, preferably near the 3Lion , for any
future consultation.
The 3Lion must always be installed with the 3Link .
The 3Lion can be installed with a maximum inclination of 90° compared to its
natural positioning (i.e. with the poles facing up).
Do not bump, puncture, disassemble, deform the 3Lion and the 3link . Do not open
the 3Lion .
In the event of electrolyte leakage, do not touch the battery. In case of contact,
immediately flush skin with warm water and seek medical advice immediately.
Be careful when installing, so that the two poles of the 3Lion do not come in contact
with each other. Use isolated equipment and do not place and/or leave metal objects
close to the product.
Always dispose of the battery according to local laws. Do not dispose of other
industrial waste.
Protect the poles of the 3Lion from any contact with electrically conductive objects.
The device must be protected from direct sunlight or direct heat sources to avoid
overheating.
Do not install the appliance in a sealed environment, otherwise it may overheat.
Make sure that there is air circulation in the room where it is installed.
To avoid the risk of electric shock and/or fire, make sure the power supply is in good
condition.
Do not use the appliance with damaged cables and/or of inadequate cross-section.
Do not use the device in an environment with high humidity or direct contact with
splashes of water and/or liquids or in the rain.
Install the device using cables of the appropriate cross-section as recommended in the
section "INSTALLATION INSTRUCTIONS"
